1.5KE110A

1.5KE6.8(C)A THRU 1.5KE440(C)A Stand - Off Voltage - 6.8 to 440 Volts TRANSIENT VOLTAGE SUPPRESSOR Peak Pulse Power - 1500 Watt FEATURES ● ● ● ● ● Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time DO-201AE High Temperat Soldering Guaranteed : 265 C/10 sec/.375." (9.5mm) Lead Length, 51bs., (2.3kg) Tension 1.0 (25.4) MIN. 0.220(5.6) 0.197(5.0) DIA. MECHANICAL DATA ● ● ● ● ● 0.375(9.5) 0.335(8.5) Case: JEDEC DO-201 molded Plastic Terminals: Axial Leads, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band Except Bi-Directional Marking: Any Weight: 1.2grams(approx) 1.0 (25.4) MIN. 0.042(1.06) 0.038(0.96) DIA. Dimensions in inches and (millimeters) “C” Suffix Designates Bi-directional Devices “A” Suffix Designates 5% Tolerance Devices No Suffix Designates 10% Tolerance Devices Maximum Ratings and Electrical Characteristics Characteristic Peak Pulse Power Dissipation at TA = 25°C (Note 1, 2, 5) Figure 3 Peak Forward Surge Current (Note 3) Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 1 Steady State Power Dissipation (Note 2, 4) Operating and Storage Temperature Range @TA=25°C unless otherwise specified Symbol PPPM IFSM IPPM PM(AV) Tj, TSTG Value 1500 Minimum 200 See Table 1 5.0 -65 to +175 Unit W A A W °C Note: 1. Non-repetitive current pulse, per Figure 1 and derated above TA = 25°C per Figure 4. 2. Mounted on 40mm2 copper pad. 3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum. 4. Lead temperature at 75°C = TL . 5. Peak pulse power waveform is 10/1000µS. 1.5KE6.8(C)A THRU 1.5KE440(C)A Stand - Off Voltage - 6.8 to 440 Volts TRANSIENT VOLTAGE SUPPRESSOR Peak Pulse Power - 1500 Watt Electronics Characteristics 1.5KE PART NUMBER UNI- POLAR 1.5KE6.8A 1.5KE7.5A 1.5KE8.2A 1.5KE9.1A 1.5KE10A 1.5KE11A 1.5KE12A 1.5KE13A 1.5KE15A 1.5KE16A 1.5KE18A 1.5KE20A 1.5KE22A 1.5KE24A 1.5KE27A 1.5KE30A 1.5KE33A 1.5KE36A 1.5KE39A 1.5KE43A 1.5KE47A 1.5KE51A 1.5KE56A 1.5KE62A 1.5KE68A 1.5KE75A 1.5KE82A 1.5KE91A 1.5KE100A 1.5KE110A 1.5KE120A 1.5KE130A 1.5KE150A 1.5KE160A 1.5KE170A 1.5KE180A 1.5KE200A 1.5KE220A 1.5KE250A 1.5KE300A 1.5KE350A 1.5KE400A 1.5KE440A BI-POLAR 1.5KE6.8CA 1.5KE7.5CA 1.5KE8.2CA 1.5KE9.1CA 1.5KE10CA 1.5KE11CA 1.5KE12CA 1.5KE13CA 1.5KE15CA 1.5KE16CA 1.5KE18CA 1.5KE20CA 1.5KE22CA 1.5KE24CA 1.5KE27CA 1.5KE30CA 1.5KE33CA 1.5KE36CA 1.5KE39CA 1.5KE43CA 1.5KE47CA 1.5KE51CA 1.5KE56CA 1.5KE62CA 1.5KE68CA 1.5KE75CA 1.5KE82CA 1.5KE91CA 1.5KE100CA 1.5KE110CA 1.5KE120CA 1.5KE130CA 1.5KE150CA 1.5KE160CA 1.5KE170CA 1.5KE180CA 1.5KE200CA 1.5KE220CA 1.5KE250CA 1.5KE300CA 1.5KE350CA 1.5KE400CA 1.5KE440CA REVERS REVERSE BREAKDOWN BREAKDOWN MAXIMUM PEAK E TEST STANDVOLTAGE VOLTAGE CLAMPING PULSE LEAKAGE CURREN OFF VBR(V) VBR(V) VOLTAGE CURREN @ V T IT (mA) VOLTAGE RWM MIN.@IT MAX.@IT @Ipp Vc(V) T Ipp (A) IR(µA) VRWM(V) 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 7.14 7.88 8.61 9.50 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 144.8 134.5 125.6 113.4 104.8 97.4 91.0 83.5 71.7 67.6 60.3 54.9 49.7 45.8 40.5 36.7 33.3 30.5 28.2 25.6 23.5 21.7 19.7 17.9 16.5 14.8 13.5 12.2 11.1 10.0 9.2 8.5 7.3 6.9 6.5 6.2 5.5 4.6 4.4 3.7 3.2 2.8 2.5 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1.5KE6.8(C)A THRU 1.5KE440(C)A RATINGS AND CHARACTERISTIC CURVES 100 100 PPPM-Peak Pulse Power (kW) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% 1.0µs 10µs 100µs 1.0ms 10ms 87.5 75 62.5 50 37.5 25 12.5 0 0 25 50 75 100 125 150 175 200 10 1 0.1 0.1µs Fig. 1 - Peak Pulse Power Rating Curve 150 10000 td - Pulse Width (sec.) TA - Ambient Temperature (°C) Fig.2 - Pulse Derating Curve IPPM - Peak Pulse Current,% IRSM 100 Peak Value IPPM Half Value- IPPM 2 is defined as the point where the peak current decays to 50% of IPPM CJ - Capacitance (pF) tr = 10µsec. TJ = 25°C Pulse Width (t d) Unidirectional Bidirectional VR = 0 1000 VR = Rated Stand-off Voltage 100 50 10/1000µsec.Waveform as defined by R.E.A. f = 1MHz Vsig = 50mVp-p TJ = 25°C td 0 0 1.0 2.0 3.0 4.0 10 5 10 100 500 Fig.3 - Pulse Waveform 60Hz Resistive or Inductive Load IFSM-Peak Forward Surge Current (A) 8.0 t - Time(ms) Fig. 4 - Typical Junction Capacitance 200 VWM - Reverse Stand-Off Voltage (V) 8.3ms Single Half Sine-Wave (JEDEC Method)TJ=TJ max. PM(AV),Steady State Power Diss ipat ion (W) 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.6x1.6x.040" (40x40x1mm) Copper Heat Sinks L=0.375" (9.5mm) Lead Lengths 100 25 50 75 100 125 150 175 200 10 1 10 100 Fig. 5 - Steady State Power Derating Curve TL - Lead Temperature (°C) Number of Cycles at 60 Hz Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only