1N5822

1N5820 THRU 1N5822 SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 40 Volts Forward Current - 3.0 Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ● Metal silicon junction,majority carrier conduction ● Guardring for overvoltage protection ● Low power loss,high erriciency ● High current capability,low forward voltage drop ● High surge capability ● For use in low voltage,high frequency inverters, free wheeling,and polarity protection applications ● High temperature soldering guaranteed: 250 C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension ● DO-201AD 1.0 (25.4) MIN. 0.220 (5.6) 0.197(5.0) DIA. 0.375(9.5) 0.285(7.2) MECHANICAL DATA Case: JEDEC DO-201AD molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.04 ounce, 1.10 grams 0.052 (1.3) 0.048 (1.2) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for current capacitive load derate by 20%. Characteristic Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length at TL=95 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range SYMBOLS 1N5820 1N5821 1N5822 UNITS V V V A A VRRM VRMS VDC I(AV) IFSM VF IR CJ RqJA TJ,TSTG 20 14 20 30 21 30 3.0 80.0 40 28 40 0.475 0.500 2.0 20.0 300.0 40.0 -65 to +125 0.525 V mA pF C/W C Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted 1N5820 THRU 1N5822 RATINGS AND CHARACTERISTIC CURVES FIG.1-TYPICAL FORWARD CURRENT FIG.2-MAXIMUM NON-REPETITIVE PEAK DERATING CURVE FORWARD SURGE CURRENT 100 AVERAGE FORWARD CURRENT, 3.0 PEAK FORWARD SORGE CURRENT,(A) 8.3ms Single Half Sine-Wave Tj (JEDEC Method) =T 50 j max 2.0 (A) Single Phase Half Wave 60Hz Load 1.0 Inductive or Resistive 0.375"(9.5mm) Lead Length 1 Cycle 0 10 0.1 10 100 0 20 40 60 80 1005 9 120 140 NUMBER OF CYCLES AT 60HZ FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, 10 j 10 INSTANTANEOUS REVERSE CURRENT, j 1.0 (mA) (A) j 1.0 j Pluse Width=300uS 1% Duty Cycle 0.1 j 0.1 0.01 0 20 40 60 80 100 120 140 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLT AGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE,(pF) 100 j f=1MHz V sig =50mV 10 0.1 1.0 10 100 REVERSE VOLATAGE,(V)