ES2D

Reverse Voltage - 50 to 600 Volts SURFACE MOUNT SUPER FAST RECTIFIER ES2A THRU ES2J Forward Current - 2.0 Ampere FEATURES The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ● For surface mounted applications ● ● ● SMB ( DO-214AA ) Low reverse leakage ● Built-in strain relief,ideal for automated placement ● High forward surge current capability ● High temperature soldering guaranteed: 250℃/10 seconds at terminals Super fast switching for high efficiency .083(2.11) .075(1.91) .155(3.94) .130(3.30) .185(4.70) .160(4.06) .012(.305) .006(.152) MECHANICAL DATA Case: JEDEC DO-214AA molded plastic body Terminals: Solder plated , solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.005 ounce, 0.138 grams .096(2.44) .084(2.13) .060(1.52) .030(0.76) .008(.203) .002(.051) .220(5.59) .200(5.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage @IF = 2.0A Symbol VRRM VRWM VR VR(RMS) IO ES2A ES2B ES2C ES2D ES2E ES2G ES2J Unit V V A 50 35 100 70 150 105 200 140 2.0 300 210 400 280 600 420 IFSM VFM IRM trr Cj Tj, TSTG 25 0.95 50 1.3 10 350 35 20 -55 to +150 1.7 A V µA nS pF °C Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ES2A THRU ES2J RATINGS AND CHARACTERISTIC CURVES IF, INSTANTANEOUS FORWARD CURRENT (A) 2.4 10 IO, AVERAGE FORWARD CURRENT (A) Tj = 25°C Pulse width = 300µs 2.0 1.6 1.2 0.8 0.4 0 1.0 0.1 25 50 75 100 125 150 175 0.01 0 0.4 0.8 1.2 1.6 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) 60 50 40 30 20 10 0 1 10 1000 Single Half-Sine-Wave (JEDEC Method) Tj = 125°C 100 10 Tj = 25°C 1.0 0.1 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI +0.5A (-) Pulse Generator (Note 2) (+) (-) 0A -0.25A 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit