ES3D

Reverse Voltage - 50 to 600 Volts SURFACE MOUNT SUPER FAST RECTIFIER ES3A THRU ES3J Forward Current - 3.0 Ampere FEATURES ● ● ● ● ● ● ● SMC ( DO-214AB ) The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Super fast switching for high efficiency Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds at terminals .128(3.25) .108(2.75) .245(6.22) .220(5.59) .280(7.11) .260(6.60) .012(.305) .006(.152) MECHANICAL DATA Case: JEDEC DO-214AB molded plastic body Terminals: Solder plated , solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.007 ounce, 0.24grams .103(2.62) .079(2.00) .060(1.52) .030(0.76) .008(.203) .002(.051) .320(8.13) .305(7.75) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage @IF = 3.0A Symbol VRRM VRWM VR VR(RMS) IO ES3A ES3B ES3C ES3D ES3E ES3G ES3J Unit V V A 50 35 100 70 150 105 200 140 3.0 300 210 400 280 600 420 IFSM VFM IRM trr Cj Tj, TSTG 0.95 100 1.3 10 500 35 45 -55 to +150 1.7 A V µA nS pF °C Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ES3A THRU ES3J RATINGS AND CHARACTERISTIC CURVES IF, INSTANTANEOUS FORWARD CURRENT (A) 3.0 10 IO, AVERAGE RECTIFIED CURRENT (A) 2.0 1.0 1.0 0.1 0 25 50 75 100 125 150 175 0.01 Tj = 25°C Pulse Width: 300µs 0 0.4 0.8 1.2 1.6 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (A) 1000 IFSM, PEAK FORWARD SURGE CURRENT (A) 120 Single Half-Sine-Wave (JEDEC Method) 100 80 60 40 20 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 100 100 Tj = 125°C 10 Tj = 25°C 1.0 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr 50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI +0.5A (-) Pulse Generator (Note 2) (+) (-) 0A -0.25A 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit