FR607

FR601 THRU FR607 Reverse Voltage - 50 to 1000 Volts FAST RECOVERY RECTIFIER Forward Current - 6.0 Ampere FEATURES The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ● Fast switching for high efficiency ● Low reverse leakage ● High forward surge current capability ● High temperature soldering guaranteed: ● 250 C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension ● R-6 1.0 (25.4) MIN. 0.360(9.1) 0.340(8.6) DIA. MECHANICAL DATA Case: R-6 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.072 ounce, 2.05 grams 0.360(9.1) 0.340(8.6) 1.0 (25.4) MIN. 0.052(1.3) 0.048(1.2) DIA. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length at TA=75 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 6.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range SYMBOLS FR 601 FR 602 FR 603 FR 604 FR 605 FR 606 FR 607 UNITS V V V A A V µA VRRM VRMS VDC I(AV) IFSM VF IR trr CJ R JA TJ,TSTG 50 35 50 100 70 100 200 140 200 400 280 400 6.0 300.0 1.3 10.0 200.0 600 420 600 800 560 800 1000 700 1000 150 250 150.0 10.0 -65 to +150 500 ns pF C/W C Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted FR601 THRU FR607 RATINGS AND CHARACTERISTIC CURVES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1- FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES 6.0 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 4.8 250 3.6 200 2.4 Single Phase Half Wave 60Hz Resistive or inductive Load 150 1.2 100 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0 0 25 50 75 100 125 150 175 50 1 10 100 AMBIENT TEMPERATURE, C NUMBER OF CYCLES AT 60 Hz FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 200 FIG. 4-TYPICAL REVERSE CHARACTERISTICS 1,000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES 100 100 TJ=100 C 10 10 1 TJ=25 C PULSE WIDTH=300 ms 1%DUTY CYCLE 1 TJ=25 C 0.1 0.1 0.6 0.8 1.0 1.2 1.4 1.5 0.01 INSTANTANEOUS FORWARD VOLEAGE, VOLTS 0 20 40 60 80 100 PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 5-TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE, C/W 2000 1000 TJ=25 C 100 FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE JUNCTION CAPACITANCE, pF 10 100 1 0.1 10 0.01 0.1 1 10 100 0.1 1.0 10 100 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec.