KBPC301

KBPC3005 THRU KBPC310 Reverse Voltage - 50 to 1000 Volts SINGLE PHASE SILICON BRIDGE RECTIFIER Forward Current - 3.0 Ampere FEATURES ● ● KBPC3 Diffused Junction Surge overload rating: 50A peak MECHANICAL DATA ● C ase: UL-94 Class V-0 recognized Flame Retardant Epoxy Terminals : Plated leads solderable per MIL-STD 202, method 208 ● M ounting Position: Any ● Marking: Type Number ● Dim ensions in inches and (m ilim eters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage per leg Peak Reverse Current At Rated DC Blocking Voltage I2t Rating for Fusing (t 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. KBPC3005 THRU KBPC310 RATINGS AND CHARACTERISTIC CURVES IAVE, AVERAGE FORWARD OUTPUT CURRENT (A) 3.0 10 Resistive or Inductive load Mounted on Metal chassis IFSM, FORWARD CURRENT (A) 2.0 Mounted on PC Board 1.0 1.0 0.1 Tj = 25°C 0 25 0.01 50 75 100 125 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve Pulse width = 300µs 0 0.4 0.8 1.6 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 50 40 30 Single half sine-wave JEDEC method IR, INSTANTANEOUS REVERSE CURRENT (µA) 60 IF, PEAK FORWARD SURGE CURRENT (A) TC = 50°C 10 Tj = 100°C 1.0 20 10 0 1.0 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 0.1 Tj = 25°C 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element