KBPC604

KBPC6005 THRU KBPC610 Reverse Voltage - 50 to 1000 Volts SINGLE PHASE SILICON BRIDGE RECTIFIER Forward Current - 6.0 Ampere FEATURES ● ● KBPC6 .276(7.0) .236(6.0) Diffused Junction Surge overload rating: 125A peak .042(1.07) DIA. .038(0.97) .750 (19.0) MIN MECHANICAL DATA ● .620(15.7) .580(14.7) HOLE FOR NO.6 SCREW C ase: UL-94 Class V-0 recognized Flame Retardant Epoxy Terminals : Plated leads solderable per MIL-STD 202, method 208 ● M ounting Position: Any ● Marking: Type Number ● .445(11.3) .405(10.3) .620(15.7) .580(14.7) .445(11.3) .405(10.3) Polarity shown on side of case, Positive lead by beveled corner. Dim ensions in inches and (m ilim eters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage per leg Peak Reverse Current At Rated DC Blocking Voltage I2t Rating for Fusing (t 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. KBPC6005 THRU KBPC610 RATINGS AND CHARACTERISTIC CURVES 10 Resistive or Inductive Load IO, AVERAGE RECTIFIED OUTPUT CURRENT (A) 8 IF, INSTANTANEOUS FORWARD CURRENT (A) 100 10 6 Mounted on Metal Chassis 1.0 4 Mounted on PC Board 2 0.1 0 0 50 100 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IFSM, PEAK FORWARD SURGE CURRENT (A) 125 10 8.3ms Single half-sine-wave TJ = 125°C 100 1.0 Tj = 100°C 75 50 0.1 25 0.01 Tj = 25°C 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics