S2DA

S2AA THRU S2MA Reverse Voltage - 50 to 1000 Volts SURFACE MOUNT GENERAL RECTIFIER Forward Current - 2.0 Ampere FEATURES ● ● ● ● ● ● The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds at terminals SMA(DO-214AC) .062(1.90) .055(1.40) .114(2.90) .098(2.50) .181(4.60) .157(4.00) .012(.305) .006(.152) .103(3.00) .079(2.00) .060(1.52) .030(0.76) .008(.203) .002(.051) MECHANICAL DATA Case: JEDEC DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.003 ounce, 0.093 grams .208(5.60) .188(4.80) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 110°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Peak Reverse Current At Rated DC Blocking Voltage @IF = 2.0A @TA = 25°C @TA = 125°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM Cj R JL @TA=25°C unless otherwise specified S2AA 50 35 S2BA 100 70 S2CA 200 140 S2DA 400 280 2.0 60 1.10 5.0 50 15 16 S2GA 600 420 S2KA 800 560 S2MA 1000 700 Unit V V A A V µA pF °C/W °C Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range Tj, TSTG -55 to +150°C Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. S2AA THRU S2MA RATINGS AND CHARACTERISTIC CURVES FIG.1 -FORWARD CURRENT DERATING CURVE 2.5 PEAK FORW ARD SURGE CURRENT , AMPERES FIG.2 -MAXI M UM NONREPETITIVE SU RGE CURRENT 60 50 40 30 20 10 0 Pulse Width 8.3ms Single HalfSineWave (JEDEC METHOD) AV ERAGE FORWARD CURRENT AMPERES 2.0 1.5 1.0 0.5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 160 1 2 5 10 20 50 100 LEAD TEMPERATURE , C NUMBER OF CYCL ES AT 60Hz FIG.3 -TYPICAL FORW ARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, (A) 1000 FI G.4 -TYPI CAL REV ERSE CHARACTERI STICS INSTANTANEOUS REV ERSE CURRENT, (uA) TJ = 125 C 100 1.0 10 0.1 TJ = 25 C 1.0 TJ = 25 C PULSEWIDTH:300us .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 0 20 40 60 80 100 120 140 INST ANTANEOUS F ORWARD V OLTAGE, V OLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)