SMR-CLD-Q1

DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. SMT 0805 AlInGaP MSpice: SMx-CLD Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. • • • • • High brightness diffused surface mount LED. Super wide viewing angle of 160°. Equivalent to 0805 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 1 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. Part Ordering Number SMS-CLD-N2P-1 • • • SMS-CLD-N2 SMS-CLD-P1 SMS-CLD-P2 Chip Technology / Viewing Color Angle AlInGaP / Super Red 160 Luminous Intensity @ If = 20mA, Iv ( mcd ) 35.5 … 71.5 35.5 … 45.0 45.0 … 56.0 56.0 … 71.5 SMR-CLD-PQ1-1 • • • SMR-CLD-P1 SMR-CLD-P2 SMR-CLD-Q1 AlInGaP / Red 160 45.0 … 90.0 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 SMO-CLD-P2Q-1 • • • SMO-CLD-P2 SMO-CLD-Q1 SMO-CLD-Q2 AlInGaP / Orange 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 SMY-CLD-P2Q-1 • • • SMY-CLD-P2 SMY-CLD-Q1 SMY-CLD-Q2 AlInGaP / Yellow 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 SMG-CLD-M2N-1 • • • SMG-CLD-M2 SMG-CLD-N1 SMG-CLD-N2 AlInGaP / Green 160 22.4 … 45.0 22.4 … 28.5 28.5 … 35.5 35.5 … 45.0 NOTE: 1. All part number above comes in a standard quantity of 3000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. All optical and electrical data are measured at 25°C. 5. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 2 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. Electrical Characteristics. (Ta = 25°C) Vf @ If= 20 mA Part Number All devices Typ. (V) 1.8 Max. (V) 2.4 Vr @ Ir =10uA Min.(V) 12 Forward voltages are tested using a current pulse of 1 ms and has an accuracy of ± 0.1V. Wavelength Grouping. Color SMS, Super Red SMR; Red SMO; Orange Group Full Full Full W X Y Z Wavelength distribution (nm) 625 – 640 620 – 630 600 – 612 600 – 603 603 – 606 606 - 609 609 - 612 582 – 594 582 – 585 585 – 588 588 - 591 591 - 594 564.5 – 576.5 564.5 – 567.5 567.5 – 570.5 570.5 – 573.5 573.5 – 576.5 SMY; Yellow Full W X Y Z SMG; Green Full W X Y Z Dominant wavelength is measured with an accuracy of ±1 nm. 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 3 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. Absolute Maximum Ratings Maximum Value DC forward current. Peak pulse current. (tp ≤ 10 µs, Duty cycle = 0.1) Reverse voltage. LED junction temperature. Operating temperature. Storage temperature. Power dissipation ( at room temperature ) 30 250 12 110 -40 … +105 -40 … +105 72 Unit mA mA V °C °C °C mW Material Material Lead-frame. Package. Note: Product is Pb free. Cu Alloy With NiPdAu Plating. High Temperature Resistant Epoxy Resin. Recommended Solder Pad 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 4 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. Relative intensity vs. forward current. Intensity vs. DC Forward Current 2.2 Relative intensity. Normalized at 20 mA. 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 Forward Current (mA) Forward Current (mA) 30 25 20 15 10 5 0 1.2 35 Forward current vs. forward voltage. Forward Current vs. Forward Voltage 1.4 1.6 Forward Voltage (V) 1.8 2 Radiation pattern. 30 o 20 o Maximum current vs. ambient temperature. 0o 1.0 10 o Max forward Current vs Temperature 35 30 25 20 15 10 5 0 10 20 30 40 50 60 70 80 90 100 110 0.6 50 o o 60 70 80 0.4 o 0.2 o Forward Current, If 40 o 0.8 Ambient Temperature 0 90 o Relative Intensity vs. Wavelength Relative Spectra Emission 1.0 0.9 Orange Relative Intensity 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 500 550 600 650 700 750 800 Green Red Super Red Wavelength (nm) 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 5 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. Taping And Orientation. Reels come in quantity of 3000 units. Reel diameter is 180 mm. 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 6 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. Recommended IR-reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020B) 275 250 235-240oC 10-30s Ramp-up 3 oC/sec max. 183 oC 225 200 Temperature ( C) 175 60-150s o 150 125 Ramp-dow n 6 oC/sec max. Preheat 60-120s 100 75 50 360s max 25 0 50 100 150 200 Time (sec) 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 7 of 8 DOMINANT Semiconductors PRELIMINARY UNDER DEVELOPMENT Engineering reference data are not verified. The specifications are subject to change without notice. NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors. 02/06/04 M SpiceLED AlInGaP SMx-CLD-pv4 Page 8 of 8