SMW-SLD-M2

DOMINANT Semiconductors Innovating Illumination TM DATA SHEET: SpiceLEDTM InGaN White M-Spice : SMW-SLD SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpiceLED™ packs a powerful performance and is a highly reliable design device. Its versality enables its application in automotive applicances, key-pad illumination, hand-held devices such as PDAs, notebooks, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment. Features: > > > > > > High brightness surface mount LED. Super wide viewing angle of 160°. Equivalent to 0805 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering and TTW soldering. Environmental friendly; RoHS compliance. Applications: > > > > > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. Consumer Appliances: LCD illumination as in PDAs, LCD TV. Communication: indicator and backlight in mobilephone. Display: full color display video notice board. Industry: white goods (eg: Oven, microwave, etc.). © 2005 SpiceLED is a trademark of DOMINANT Semiconductors. All rights reserved. Product specifications are subject to change without notice. 1 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Part Ordering Number SMW-SLD-LM2-1 • SMW-SLD-L1 • SMW-SLD-L2 • SMW-SLD-M1 • SMW-SLD-M2 SMW-SLD-L2N1-1 • SMW-SLD-L2 • SMW-SLD-M1 • SMW-SLD-M2 • SMW-SLD-N1 Chip Technology / Color InGaN White Viewing Angle˚ 160 Luminous Intensity @ IF = 2mA IV (mcd) 11.20 - 28.50 11.20 - 14.00 14.00 - 18.00 18.00 - 22.40 22.40 - 28.50 14.00 - 35.50 14.00 - 18.00 18.00 - 22.40 22.40 - 28.50 28.50 - 35.50 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Other luminious intensity groups are also available upon request 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 2 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Electrical Characteristics at Ta=25˚C Vf @ If = 2mA Part Number SMW-SLD Vf @ If = 10mA Max. (V) 3.0 Vr @ Ir = 10uA Min. (V) 5 Min. (V) 2.6 Typ. (V) 2.8 Typ. (V) 3.0 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value DC forward current Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) Reverse voltage; Ir max = 10µA ESD threshold (HBM) LED junction temperature Operating temperature Storage temperature Power dissipation (at room temperature) 15 100 5 1000 110 -40 … +100 -40 … +100 45 Unit mA mA V V ˚C ˚C ˚C mW Material Material Lead-frame Package Note: product is Pb free Cu Alloy With NiPdAu Plating High Temperature Resistant Epoxy Resin 3 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Wavelength Grouping Dominant White Bin Structure 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.27 • • • 0.28 A1 A2 • • • 0.29 A3 A4 • • • C1 C2 • • • C3 C4 • • • E1 E2 • • • E3 E4 • • • 0.30 0.31 0.32 0.33 0.34 0.35 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy 0.2775 0.2732 0.2775 0.2557 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.3275 0.3561 0.3275 0.3386 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 0.3275 0.3736 0.3275 0.3561 0.2775 0.2907 0.2775 0.2732 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 Bin E1 E2 E3 E4 Cx Cy Cx Cy Cx Cy Cx Cy 0.3275 0.3561 0.3275 0.3386 0.3400 0.3768 0.3400 0.3593 0.3400 0.3768 0.3400 0.3593 0.3525 0.3975 0.3525 0.3800 0.3400 0.3943 0.3400 0.3768 0.3525 0.4150 0.3525 0.3975 0.3275 0.3736 0.3275 0.3561 0.3400 0.3943 0.3400 0.3768 Dominant color coordinate is measured with an accuracy of ± 0.01. 4 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Intensity Vs Forward Current 6 5 Forward Current Vs Forward Voltage 30 25 20 15 10 5 0 4 3 2 1 0 0 2 4 6 8 10 Forward Current, mA IV Normalized at 2mA 0 1 2 3 4 Forward Current, mA Forward Voltage, V Maximum Current Vs Ambient Temperature 20 Relative Intensity Vs Wavelength 1.2 1 Forward Current, mA Relative Intensity 0 10 20 30 40 50 60 70 80 90 100 15 0.8 0.6 0.4 0.2 10 5 0 0 400 450 500 550 600 650 700 Ambient Temperature Wavelength, nm Radiation Pattern 30 o 20 o 10 o 0o 1.0 40 o 0.8 50 o 60 70 80 o 0.6 0.4 o 0.2 o 90 o 0 5 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD SpiceLED • InGaN White M-Spice : SMW-SLD Package Outlines TM Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. 6 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component. 7 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Taping and orientation • Reels come in quantity of 3000 units. • Reel diameter is 180 mm. 8 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Packaging Specification 9 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Packaging Specification Moisture sensitivity level Barcode label DOMINANT Semiconductors LOT NO : lotno ROHS Compliant PB Free S/N : xxx D/C: xxxx PART NO : partno QTY : qty GROUP : group Reel Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc SpiceLED Weight (gram) Weight (gram) 0.001 0.034 1 completed bag (3000pcs) 140 10 190 ± 10 DOMINANT TM Semiconductors Cardboard Box For SpiceLED TM Cardboard Box Size Small Large Dimensions (mm) Empty Box Weight (kg) 0.58 1.74 Reel / Box Quantity / Box (pcs) 300 x 250 x 250 416 x 516 x 476 15 reels MAX 55 reels MAX 45,000 MAX 165,000 MAX 10 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 250 225 200 183˚C Ramp-up 3˚C/sec max. 235-240˚C 10-30s Temperature (˚C) 175 150 125 100 75 50 25 0 50 100 150 200 Preheat 60-120s 360s max Rampdown 6˚C/sec max. 60-150s Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 275 250 225 217˚C Ramp-up 3˚C/sec max. 255-260˚C 10-30s Temperature (˚C) 200 175 150 125 100 75 50 25 0 50 Preheat 60-180s 480s max 100 150 200 Rampdown 6˚C/sec max. 60-150s Time (sec) 11 23/02/2006 V1.0 DOMINANT TM Semiconductors Innovating Illumination InGaN White M-Spice : SMW-SLD Revision History Page Subjects New Format Date of Modification 23 Feb 2006 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Semiconductors. DOMINANT Semiconductors Innovating Illumination TM DOMINANT Semiconductors Sdn Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: sales@dominant-semi.com Homepage: http://www.dominant-semi.com