DOMINANT Semiconductors
Surface Mount AlInGaP Spice LED : SSx-CLD
Note: The center pad is a common cathode. Please take care during soldering to avoid shorting.
• • • • •
High brightness diffused surface mount LED. Super wide viewing angle of 160°. Equivalent to 0603 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 1 of 1
DOMINANT Semiconductors
Part Ordering Number SSS-CLD-N2P-1
• • • SSS-CLD-N2 SSS-CLD-P1 SSS-CLD-P2
Chip Technology / Viewing Color Angle AlInGaP / Super Red 160
Luminous Intensity @ If = 20mA, Iv ( mcd ) 35.5 … 71.5
35.5 … 45.0 45.0 … 56.0 56.0 … 71.5
SSR-CLD-PQ1-1
• • • SSR-CLD-P1 SSR-CLD-P2 SSR-CLD-Q1
AlInGaP / Red
160
45.0 … 90.0
45.0 … 56.0 56.0 … 71.5 71.5 … 90.0
SSO-CLD-P2Q-1
• • • SSO-CLD-P2 SSO-CLD-Q1 SSO-CLD-Q2
AlInGaP / Orange
160
56.0 … 112.5
56.0 … 71.5 71.5 … 90.0 90.0 … 112.5
SSO-CLD-QR1-1
• • SSO-CLD-Q1 SSO-CLD-Q2 SSO-CLD-R1
71.5 … 140.0
71.5 … 90.0 91.0 … 112.5 112.5 … 140.0
•
SSY-CLD-P2Q-1
• • • SSY-CLD-P2 SSY-CLD-Q1 SSY-CLD-Q2
AlInGaP / Yellow
160
56.0 … 112.5
56.0 … 71.5 71.5 … 90.0 90.0 … 112.5
SSG-CLD-M2N-1
• • • SSG-CLD-M2 SSG-CLD-N1 SSG-CLD-N2
AlInGaP / Green
160
22.4 … 45.0
22.4 … 28.5 28.5 … 35.5 35.5 … 45.0
SSP-CLD-KL1-1
• • • SSP-CLD-K1 SSP-CLD-K2 SSP-CLD-L1
AlInGaP / Pure Green
160
7.2 … 14.0
7.2 … 9.0 9.0 … 11.2 11.2 … 14.0
NOTE: 1. All part number above comes in a standard quantity of 3000 units per reel. 2. Luminous intensity is measured with an accuracy of ±11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 2 of 2
DOMINANT Semiconductors
Wavelength Grouping. Color
SSS, Super Red SSR; Red SSO; Orange
Group
Full Full Full W X Y Z
Wavelength distribution (nm)
625 – 640 620 – 630 600 – 612 600 – 603 603 – 606 606 - 609 609 - 612 582 – 594 582 – 585 585 – 588 588 - 591 591 - 594 564.5 – 576.5 564.5 – 567.5 567.5 – 570.5 570.5 – 573.5 573.5 – 576.5 552.5 – 564.5 552.5 – 555.5 555.5 – 558.5 558.5 – 561.5 561.5 – 564.5
SSY; Yellow
Full W X Y Z
SSG; Green
Full W X Y Z
SSP; Pure Green
Full W X Y Z
Dominant wavelength is measured with an accuracy of ±1 nm.
Electrical Characteristics at Ta=25°C.
Vf @ If = 20 mA Minimum (V) 1.8 Typical (V) 2.0 Maximum (V) 2.4
Vr @ Ir = 10uA Min.(V) 12
Vf is measured with an accuracy of ±0.1 V.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 3 of 3
DOMINANT Semiconductors
Absolute Maximum Ratings
Maximum Value DC forward current. Peak pulse current. (tp ≤ 10 µs, Duty cycle = 0.1) Reverse voltage. LED junction temperature. Operating temperature. Storage temperature. Power dissipation ( at room temperature ) 12 110 -40 … +100 -40 … +100 80 V °C °C °C mW 30 250 Unit mA mA
Material
Material Lead-frame. Package. Note: Product is Pb free. Cu Alloy With NiPdAu Plating. High Temperature Resistant Epoxy Resin.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 4 of 4
DOMINANT Semiconductors
Recommended Solder Pad
Note: Component is based on a new package platform, which features “Bottom Only Terminations”. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component are not solderable.
Surfaces are not intended for soldering.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 5 of 5
DOMINANT Semiconductors
Relative intensity vs. forw ard current.
Intensity vs. DC Forward Current
Relative intensity. Normalized at 20 mA.
Forw ard current vs. forw ard voltage.
Forward Current vs. Forward Voltage
35 30
Forward Current (mA)
2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 Forward Current (mA)
25 20 15 10 5 0 1.2
1.4
1.6
1.8
2
2.2
Forward Voltage (V)
Radiation pattern.
30 o 20
o
Maximum current vs. ambient temperature.
0o 1.0
10 o
Max forward Current vs Tem erature p
35
Forward Current, If
40
o
0.8
30 25 20 15 10 5 0 10 20 30 40 50 60 70 80 90 100
Am ient Tem erature b p
0.6 50 o
o
60 70 80
0.4
o
0.2
o
90 o
0
Relative Intensity vs. Wavelength
Relative Spectra Emission 1.0 0.9 Yellow 0.8 Pure 0.7 Green 0.6 Green 0.5 0.4 0.3 0.2 0.1 0.0 500
Orange Red Super Red
Relative Intensity
600
700
800
Wavelength (nm)
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 6 of 6
DOMINANT Semiconductors
Taping And Orientation.
Reels come in quantity of 3000 units. Reel diameter is 180 mm.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 7 of 7
DOMINANT Semiconductors
Recommended Sn-Pb IR-Reflow Soldering Profile.
Classification Re flow Pr o file (JEDEC J-STD-020C)
275 250 225
Ramp- up 3 oC/sec 235- 240oC 10- 30s
Temperature ( C)
200 175 150 125 100 75 50 25 0
o
18 3 oC
60- 150s
Ramp- dow n 6 oC/sec max. Pr eheat 60- 120s 360s max
50
100
15 0
2 00
Time (sec)
Recommended Pb Free IR-Reflow Soldering Profile.
Classification Re flow Pr o file (JEDEC J-STD-020C)
30 0 27 5 25 0
Ramp- up 3 oC/sec 60- 150s 260- 255oC 10- 30s
Temperature ( C)
22 5 20 0 17 5 15 0 12 5 10 0 75 50 25 0
21 7 C
o
o
Ramp- dow n 6 oC/sec max. Pr eheat 60- 180s 480s max
50
100
150
200
Time (sec)
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 8 of 8
DOMINANT Semiconductors
NOTE.
All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors.
19/05/05
S SpiceLED AlInGaP SSx-CLD-v3
Page 9 of 9
很抱歉,暂时无法提供与“SSO-CLD-P2”相匹配的价格&库存,您可以联系我们找货
免费人工找货