SSP-CLD-L1

DOMINANT Semiconductors Surface Mount AlInGaP Spice LED : SSx-CLD Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. • • • • • High brightness diffused surface mount LED. Super wide viewing angle of 160°. Equivalent to 0603 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 1 of 1 DOMINANT Semiconductors Part Ordering Number SSS-CLD-N2P-1 • • • SSS-CLD-N2 SSS-CLD-P1 SSS-CLD-P2 Chip Technology / Viewing Color Angle AlInGaP / Super Red 160 Luminous Intensity @ If = 20mA, Iv ( mcd ) 35.5 … 71.5 35.5 … 45.0 45.0 … 56.0 56.0 … 71.5 SSR-CLD-PQ1-1 • • • SSR-CLD-P1 SSR-CLD-P2 SSR-CLD-Q1 AlInGaP / Red 160 45.0 … 90.0 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 SSO-CLD-P2Q-1 • • • SSO-CLD-P2 SSO-CLD-Q1 SSO-CLD-Q2 AlInGaP / Orange 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 SSO-CLD-QR1-1 • • SSO-CLD-Q1 SSO-CLD-Q2 SSO-CLD-R1 71.5 … 140.0 71.5 … 90.0 91.0 … 112.5 112.5 … 140.0 • SSY-CLD-P2Q-1 • • • SSY-CLD-P2 SSY-CLD-Q1 SSY-CLD-Q2 AlInGaP / Yellow 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 SSG-CLD-M2N-1 • • • SSG-CLD-M2 SSG-CLD-N1 SSG-CLD-N2 AlInGaP / Green 160 22.4 … 45.0 22.4 … 28.5 28.5 … 35.5 35.5 … 45.0 SSP-CLD-KL1-1 • • • SSP-CLD-K1 SSP-CLD-K2 SSP-CLD-L1 AlInGaP / Pure Green 160 7.2 … 14.0 7.2 … 9.0 9.0 … 11.2 11.2 … 14.0 NOTE: 1. All part number above comes in a standard quantity of 3000 units per reel. 2. Luminous intensity is measured with an accuracy of ±11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 2 of 2 DOMINANT Semiconductors Wavelength Grouping. Color SSS, Super Red SSR; Red SSO; Orange Group Full Full Full W X Y Z Wavelength distribution (nm) 625 – 640 620 – 630 600 – 612 600 – 603 603 – 606 606 - 609 609 - 612 582 – 594 582 – 585 585 – 588 588 - 591 591 - 594 564.5 – 576.5 564.5 – 567.5 567.5 – 570.5 570.5 – 573.5 573.5 – 576.5 552.5 – 564.5 552.5 – 555.5 555.5 – 558.5 558.5 – 561.5 561.5 – 564.5 SSY; Yellow Full W X Y Z SSG; Green Full W X Y Z SSP; Pure Green Full W X Y Z Dominant wavelength is measured with an accuracy of ±1 nm. Electrical Characteristics at Ta=25°C. Vf @ If = 20 mA Minimum (V) 1.8 Typical (V) 2.0 Maximum (V) 2.4 Vr @ Ir = 10uA Min.(V) 12 Vf is measured with an accuracy of ±0.1 V. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 3 of 3 DOMINANT Semiconductors Absolute Maximum Ratings Maximum Value DC forward current. Peak pulse current. (tp ≤ 10 µs, Duty cycle = 0.1) Reverse voltage. LED junction temperature. Operating temperature. Storage temperature. Power dissipation ( at room temperature ) 12 110 -40 … +100 -40 … +100 80 V °C °C °C mW 30 250 Unit mA mA Material Material Lead-frame. Package. Note: Product is Pb free. Cu Alloy With NiPdAu Plating. High Temperature Resistant Epoxy Resin. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 4 of 4 DOMINANT Semiconductors Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations”. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component are not solderable. Surfaces are not intended for soldering. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 5 of 5 DOMINANT Semiconductors Relative intensity vs. forw ard current. Intensity vs. DC Forward Current Relative intensity. Normalized at 20 mA. Forw ard current vs. forw ard voltage. Forward Current vs. Forward Voltage 35 30 Forward Current (mA) 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 Forward Current (mA) 25 20 15 10 5 0 1.2 1.4 1.6 1.8 2 2.2 Forward Voltage (V) Radiation pattern. 30 o 20 o Maximum current vs. ambient temperature. 0o 1.0 10 o Max forward Current vs Tem erature p 35 Forward Current, If 40 o 0.8 30 25 20 15 10 5 0 10 20 30 40 50 60 70 80 90 100 Am ient Tem erature b p 0.6 50 o o 60 70 80 0.4 o 0.2 o 90 o 0 Relative Intensity vs. Wavelength Relative Spectra Emission 1.0 0.9 Yellow 0.8 Pure 0.7 Green 0.6 Green 0.5 0.4 0.3 0.2 0.1 0.0 500 Orange Red Super Red Relative Intensity 600 700 800 Wavelength (nm) 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 6 of 6 DOMINANT Semiconductors Taping And Orientation. Reels come in quantity of 3000 units. Reel diameter is 180 mm. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 7 of 7 DOMINANT Semiconductors Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Re flow Pr o file (JEDEC J-STD-020C) 275 250 225 Ramp- up 3 oC/sec 235- 240oC 10- 30s Temperature ( C) 200 175 150 125 100 75 50 25 0 o 18 3 oC 60- 150s Ramp- dow n 6 oC/sec max. Pr eheat 60- 120s 360s max 50 100 15 0 2 00 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Re flow Pr o file (JEDEC J-STD-020C) 30 0 27 5 25 0 Ramp- up 3 oC/sec 60- 150s 260- 255oC 10- 30s Temperature ( C) 22 5 20 0 17 5 15 0 12 5 10 0 75 50 25 0 21 7 C o o Ramp- dow n 6 oC/sec max. Pr eheat 60- 180s 480s max 50 100 150 200 Time (sec) 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 8 of 8 DOMINANT Semiconductors NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 9 of 9