CEAJ10016

CAPACITORS Small case sizes Extended temperature life 2000 hours at +105˚C Product is available loose or taped and reeled Sizes may reduce as technology continually improves. AXIAL LONG LIFE HIGH TEMPERATURE CEAJ SECTION 1 RANGE & DIMENSIONS V µF 0.47 1.0 2.2 3.3 4.7 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 . dxl 10 dxl 1 dxl 5 dxl 5 dxl 50 dxl  dxl 100 dxl 5x12.5 5x12.5 6x12.5 6x12.5 6x12.5 6x16 8x16 8x16 8x20 10x20 10x20 10x25 13x25 13x30 16x30 16x40 22x40 22x40 CASE TOLERANCE & LEAD SPEC. 6x12.5 8x13.5 8x16 8x16 8x20 10x20 10x25 13x25 13x30 16x30 5x12.5 5x12.5 6x12.5 5x12.5 6x12.5 6x12.5 6x16 6x16 8x16 8x16 8x16 8x20 8x16 8x20 10x16 8x20 10x20 10x20 10x25 10x25 13x25 13x25 13x30 13x30 16x30 16x30 16x30 5x12.5 6x12.5 6x12.5 6x16 6x16 8x16 8x16 8x20 10x16 10x20 10x25 13x25 13x30 16x30 16x40 18x40 6x12.5 6x12.5 6x16 6x16 8x16 8x16 8x20 10x16 10x20 10x25 13x25 13x30 16x30 16x40 18x40 22x40 5x12.5 5x12.5 6x12.5 6x16 6x16 8x16 8x16 8x20 10x16 10x20 10x25 13x25 13x30 16x36 16x40 18x40 22x40 22x45 5x12.5 5x12.5 6x12.5 6x12.5 6x12.5 6x16 8x16 8x16 8x16 10x16 10x20 10x25 13x25 13x30 16x30 16x40 18x40 22x40 Case Dia. (D) 5.0 6.0 8.0 10.0 12.5 16.0 18.0 22.0 25.0 Tolerance Case Dia. (D) ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 1.0 ≤ ± 1.0 Tolerance Case Length (L) ≤ ± 1.0 ≤ ± 1.0 ≤ ± 1.0 ≤ ± 1.0 ≤ ± 1.0 ≤ ± 1.0 ≤ ± 1.5 ≤ ± 1.5 ≤ ± 1.5 Lead Length (F) 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 Tolerance Lead Length (L) ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 ≤ ± 0.5 Lead Thickness (d) 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 Wire Gauge (AWG) 22 22 22 22 22 20 20 20 20 OUTLINE DRAWING Synthetic Rubber Vent Vinyl Sleeve Copper-Clad Steel Wire (tinned) Aluminium Case (with Vent on ø 10-18. No vent on other sizes) ø d ± 0,05 Diameter øD + ß max 35 min Length L + a max 35 min Dimensions in mm ORDERING INFORMATION CEAJ Range 100 Capacitance µF 1 Voltage V TR Options Tape/Reel Blank = Loose Products with a case diameter of 10mm or less will be supplied taped only. 1 F ax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS RIPPLE CURRENT SECTION 1 µF 0.47 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 V . 7 10 15 19 23 21 25 31 38 46 51 67 82 114 150 200 239 288 393 530 733 953 1215 1602 10 7 10 15 19 23 21 25 31 38 46 56 67 93 114 177 223 267 361 488 650 783 1077 1483 1712 1 7 10 15 19 23 21 25 31 38 51 61 73 101 146 177 242 329 433 572 733 912 1215 1585 5 7 10 15 19 23 22 27 33 44 54 73 88 127 174 210 291 384 498 672 816 1099 1483 5 7 10 15 19 23 25 30 41 49 69 82 116 158 194 266 359 467 611 816 1052 1398 50 7 10 15 19 23 27 33 45 61 75 106 128 174 240 321 424 554 725 1011 1326  7 10 15 19 25 30 36 51 61 89 117 143 196 265 346 463 597 836 1163 0 7 10 17 21 25 30 41 55 72 97 119 161 216 312 408 538 741 962 100 7 10 17 21 25 34 45 60 81 99 134 178 255 337 439 620 792 AXIAL LONG LIFE HIGH TEMPERATURE CEAJ SPECIFICATION Item Operating Temperature Range Rated Working Voltage Range Nominal Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics -40˚C to +105˚C 6.3 WVDC to 100WVDC 0.47 Mfd. to 6800Mfd. ± 20% (M) or ± 10%(K) (+25˚C, 120Hz) ≤ 100WVDC = I ≤ 0.01CV or 4µA >100WVDC = I ≤ 0.01CV = +100µA After 5 minutes application at +25˚C at rated voltage Rated WVDC 6.3 10 16 25 35 50 63 80 100 Surge voltage 8 13 20 32 44 63 79 100 125 Impedance ratio at 120Hz Rated Voltage [V] 6.3 10 16 25 35 50 63 80 100 -25˚C/+25˚C 4 3 2 2 2 2 2 2 2 -40˚C/+25˚C 10 8 6 4 3 3 3 3 3 After 1000 hours application of W.V. at 105˚C the capacitor shall meet the following limits: Capacitance change ≤ ± 20% of initial value Dissipation factor ≤ 200% of initial specified value Leakage current ≤ initial specified At 105˚C no voltage applied after 500 hours in the capacitor shall meet the following limits: Capacitance change ≤ ± 20% of initial value Dissipation factor ≤ 200% of initial specified value Leakage current ≤ 200 specified value Surge Voltage Characteristics at Low Temperature Load Life Test Shelf Life  F ax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758