CEBNP10016TA

CAPACITORS Miniature case sizes 2000 hour long-life grade The CEBNP is a non-polar radial electrolytic capacitor featuring much reduced case sizes. The long-life grade offers high reliability for all applications requiring a premium device. The product is fully branded for definite identification as a bipolar product. SECTION 1 ALUMINIUM ELECTROLYTIC NON - POLAR RADIAL CEBNP SPECIFICATION Item Operating Temperature Range Rated Working Voltage Range Nominal Capacitance Range Capacitance Tolerance Leakage Current tan ∂ (120Hz, +20°C) Performance Characteristics -40 to +105°C 6.3 to 100V DC 0.47 to 1000µF ± 20% (120Hz, +20°C) l ≤ 0.03CV or 3 [µA] After 2 minutes application of rated working voltage at +20°C Working Voltage [V] 6.3 10 16 25 35 50 tan ∂ max. 0.25 0.25 0.20 0.15 0.15 0.13 Working Voltage [V] 63 100 tan ∂ max. 0.10 0.12 Impedance ratio max. : at 120Hz Working Voltage [V] 6.3 10 16 25 35 50 63 -25°C/+20°C 4 3 2 2 2 2 2 -40°C/+20°C 8 6 4 4 3 3 3 Working Voltage [V] 100 -25°C/+20°C 2 -40°C/+20°C 3 Test conditions Duration 2000 hours Ambient temperature +105°C Applied voltage: Rated DC working voltage to each polarity for 1000 hours Post test requirements at +20°C Leakage current ≤ initial specified value Capacitance change ≤ ± 20% of initial measured value tan ∂ ≤ 150% of initial specified value Test conditions Duration 500 hours Ambient temperature +105°C Applied voltage (None) Post test requirements at +20°C. Same limits for high temperature loading. 5 mins in Freon TE, Arklone AM or equivalents Characteristics at Low Temp. High Temperature Loading Shelf Life Washability ORDERING INFORMATION CEBNP Range 100 Capacitance µF 1 Voltage V TA Options: TA = Tape/ Ammo-box Blank = Loose  F ax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS RANGE & CASE SIZE ALUMINIUM ELECTROLYTIC NON - POLAR RADIAL CEBNP SECTION 1 V µF 0.1-0.47 0.1 0.22 0.33 0.47 10 22 33 47 100 220 330 470 1000 2200 . 10 1 5 5 50 øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6x11 5x11 5x11 6x12 6x12 8x14 5x11 5x11 6x12 8x12 8x14 10x16 6x11 6x11 6x12 8x14 10x16 10x20 8x12 8x12 10x16 10x20 13x21 13x21 8x14 10x16 10x20 13x21 13x25 16x26 10x16 10x20 13x21 16x26 16x26 16x36 10x20 13x21 13x25 16x26 16x32 13x25 16x26 16x32 16x32 16x36  øxl/mm 5x11 5x11 5x11 6x11 6x11 8x12 10x16 10x20 13x21 16x26 16x32 0 øxl/mm 5x11 5x11 5x11 6x11 8x12 8x14 10x16 13x21 13x21 16x26 100 øxl/mm 5x11 5x11 6x11 8x12 8x12 8x14 13x21 13x21 13x25 16x26 MAXIMUM RIPPLE CURRENT V µF øxl/mm 0.1-0.47 0.1 0.22 0.33 0.47 10 22 33 47 100 220 330 470 1000 2200 . 10 1 5 5 50  0 100 63 84 140 235 310 400 690 1250 57 77 93 193 255 380 470 885 1450 42 69 98 115 205 330 445 570 1020 50 86 105 140 240 390 580 690 34 54 94 125 165 285 520 630 820 11 17 25 31 41 70 115 150 190 310 570 790 11 17 25 37 44 74 130 175 230 410 660 11 17 29 39 47 88 150 205 245 435 14 21 34 49 58 100 180 220 285 310 OUTLINE DRAWING L+1 15 min 5 min P dø Dø ± 0.5 Dø P dø 5 2.0 0.5 6.3 2.5 8 3.5 10 5.0 0.6 13 5.0 16 7.5 0.8 Dimensions in mm +0.5 5 F ax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758