RN164102F

SURFACE MOUNT 1/16W Rated Saves placement time -55°C - 125°C Industry standard size THICK FILM RESISTOR NETWORK RN16 SPECIFICATION Power rating at 70° Operating Temp. Range Derated at zero load at Maximum Working Voltage Maximum Overload Voltage Resistance Range Temperature Coefficient Resistance Tolerance 1/16W -55°C to +125°C +125°C 50v 100v 10Ω - 1M ±200ppm/°C ±5% and ±1% 0.5±0.15 OUTLINE DRAWING 1.6±0.2 0.5±0.15 0.3±0.15 0.5±0.1 0.8±0.05 3.20±0.2 0.8±0.05 3.20±0.2 0.3±0.15 0.3±0.15 1.6±0.2 0.3±0.15 Dimensions in mm 0.5±0.1 ENVIRONMENTAL CHARACTERISTICS Performance Test Temperature Coefficient Thermal Shock Low Temperature Operation Short Time Overload High Temperature Exposure Resistance to Soldering Heat Moisture Resistance Life Solderability Bending Strength SCHEMATICS n=4 n=4 SECTION 4 Test Method MIL-STD-202F, Method 304 —55°C to + 125°C MIL-STD-202F, Method 107 5 cycles, —55°C to +125°C MIL-R-55342D, Para.4.7.4 1 hour at —65°C followed by 45 minutes RCWV MIL-R-55342D, Para.4.7.5 2.5 times RCWV for 5 seconds MIL-R-55342D, Para.4.7.6 125°C for 100 hours MIL-R-55342D, Para.4.7.7 Soldered to test board at 260°C for 10 secs MIL-STD-202F, METHOD 106 10 cycles. Total 240 hours MIL-STD-202F, Method 108A 1000 hours at 70°C RCWV intermittent MIL-STD-202F, Method 208 260°C for 10 seconds coverage JIS-C-5202, Para.6.1.4 Unit mounted in centre of 90mm board length deflected 5mm in either direction for 10 seconds Appraise ±200ppm/°C ±(1%+0.05Ω) ±(1%+0.05Ω) ±(1%+0.05Ω) ±(1%+0.05Ω) ±(1%+0.05Ω) ±(2%+0.05Ω) ±(2%+0.05Ω) 95% min. R1 R1 R2 R2 Rn Rn ±(1%+0.05Ω) ORDERING INFORMATION RN16 Series 4 No. of Resistors 102 Value J Tolerance J = 5% F = 1% 142 F ax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758