1004P1K2B26M7RE

SHEET 1 OF 1 14.35 [.565 in] 4.83 [.190 in] TYP. KNOB TO BE SECURED BY A THREAD LOCK EPOXY. KNOB MUST NOT SCREW OFF EPOXY SEAL 3 1 n1.85 [.073 in] TYP. 12.45 [.490 in] 3.81 [.150 in] TYP. 4.83 [.190 in] ISOMETRIC 5.44 n [.214 in] 5.08 [.200 in] 10 12 1.27 [.050 in] P.C. MOUNTING 16.26 [.640 in] UNLOCKED SWITCH FUNCTION POS. 1 POS. 2 POS. 3 1.40 [.055 in] ON NONE ON OPEN 2-1, 5-4, 8-7, 11-10 2-3, 5-6, 8-9, 11-12 2 5 8 14.73 [.580 in] LOCKED 21.59 [.850 in] POS. 3 3.18 [.125 in] 12.70 [.500 in] 10 POS. 1 3 1 3 4 6 7 9 11 2 12 18271 REV PCR NO RELEASE FOR PRODUCTION DESCRIPTION 4 7 1.22 [.048 in] 8.00 [.315 in] 14.35 [.565 in] .76 CIRCUIT: 4PDT [.030 in] NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. PLATING MATERIAL: GOLD 5. RATING: 0.4 VA @ 20V (AC or DC) 6. MECHANICAL LIFE: 40,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL. 9. OPERATING TEMP.: -30°C to 85°C 10. DENOTES CRITICAL PARAMETER. A 1 1 10 RATING 5.08 [.200 in] 3.81 [.150 in] .55 [.022 in] 24.01 [.945 in] n 6.35 [.250 in] .85 [.033 in] PANEL MOUNTING (SCALE = 2:1) 10/10/08 BLR DATE BY THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE 1004P1K2B26M7RE DATE 1.5 : 1 DR 10/10/2008 BLR REV DWG T143006 A