200MDP1T2B3M1RE

SHEET 1 OF 1 8.13 [.320 in] .70 [.028 in] n2.38 [.094 in] n 4.95 [.195 in] n4.95 [.195 in] SWITCH FUNCTION POS. 1 POS. 2 POS. 3 ON NONE ON 2-3, 5-6 9.14 [.360 in] n6.00 [.236 in] .58 [.023 in] .38 [.015 in] 2-1, 5-4 OPEN .25 [.010 in] 6.10 [.240 in] ISOMETRIC With Standard Locking Ring Without Locking Ring KEYWAY PANEL MOUNTING 2 5.33 [.210 in] 5 POS. 1 POS. 3 25~ 1 3 4 6 CIRCUIT: DPDT 10-48 UNS-2A THREADS 5.59 [.220 in] 18545 REMOVE FUNCTION MARK FROM BODY 6/1/09 BLR Part marking was ON-OFF-ON, incorrectly 5/27/09 BLR RELEASED FOR PRODUCTION 5/22/09 BLR DATE BY DESCRIPTION 2.54 [.100 in] 1.52 [.060 in] 5.08 [.200 in] .76 [.030 in] 2.79 [.110 in] 4.06 [.160 in] 18541 PCR NO 6 2 B REV 3 3 1 C 18525 8.64 [.340 in] E-LOGO ON OPPOSITE SIDE NOTE: 1. ALL DIMENSIONS IN MM [INCH] EPOXY SEAL 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 .51 3. TERMINAL NUMBERS FOR REF ONLY [.020 in] 4. PLATING MATERIAL: GOLD 5. RATING: 0.4VA MAX. @20V (AC or DC) 6. LIFE EXPECTANCY: 30,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. INSULATION RESISTANCE: 1,000 MEGA-OHM MIN. 8. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL. 9. OPERATING TEMP.: -30°C to 85°C 10. CONTACT RESISTANCE: 20 MILLI-OHMS MAX. 11. DENOTES CRITICAL PARAMETER. 12. 2002/95/EC (ROHS) COMPLIANT. A 4.06 [.160 in] RATING .51 [.020 in] THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE 200MDP1T2B3M1RE DATE 2:1 DR 6/1/2009 BLR REV DWG T221071 C