200MSP1T2B2VS2QE

PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 15 S E R I E S 200 S W I T C H E S SUB-MINIATURE TOGGLE SWITCHES SPECIFICATIONS Contact Rating: Electrical Life: Contact Resistance: Insulation Resistance: Dielectric Strength: Operating Temperature: Dependent upon contact material 30,000 make-and-break cycles at full load 20 mΩ max. typical initial @ 2-4 VDC 100 mA for both silver and gold plated contacts 1,000 MΩ min. 1,000 V RMS @ sea level -30° C to 85° C MATERIALS Case: Toggle Handle: Bushing: Housing: Switch Support: Contacts / Terminals: Diallyl phthalate (DAP) or glass filled nylon (UL94-V0) Brass, chrome plated Brass, nickel plated Stainless steel Brass, tin plated Silver or gold plated copper alloy SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. HOW TO ORDER Series Model No. Actuator Bushing Termination Contact Material 200 Seal E MSP1 MSP2 MSP3 MSP4 MSP5 MSP6 MDP1 MDP2 MDP3 T1 T2 T3 T4 T5 B1 B2 B3 B4 B5 B6 B7 B8 M1 M2 M6 M7 VS2 Q=Silver R=Gold Epoxy Seal at Base of Terminal MSP1 T4 B5 M1 R E EXAMPLE 200 Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com info@e-switch.com 15 PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 16 S E R I E S 200 S W I T C H E S SUB-MINIATURE TOGGLE SWITCHES POS 3 MSP-1 ON NONE ON MSP-2 ON NONE (ON) MSP-3 ON OFF ON MSP-4 (ON) OFF (ON) MSP-5 ON OFF (ON) Term Comm. 2-3 OPEN 2-1 MSP-6 OFF NONE ON Term Comm. OPEN NONE 3 -1 2 Comm. Schematic 1 Epoxy Seal POS 3 POS 2 POS 1 ( ) = Momentary 3 POS 2 POS 3 ON NONE ON MDP-2 ON NONE (ON) POS 3 MDP-3 ON OFF ON POS 2 2-3, 5-6 OPEN 2-1, 5-4 POS 1 POS 1 Model No. Epoxy Seal MDP-1 Term. Comm. Schematic DPDT ( ) = Momentary 2 Comm 1 3 4 5 Comm. 6 ACTUATOR OPTIONS T1 * T2 T4 * ** T3 T5 * SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. SPDT POS 2 POS 1 Model No. ** * Actuator shown with B1, B2, B3, or B4 bushing; subtract 0.09 (2.29) for B5, B6 bushing. Subtract 0.040 (1.02) for B7, B8 bushing. ** Actuator shown with B5, B6 bushing; add 0.09 (2.29) for B1, B2, B3, and B4 bushing. Add 0.50 (1.27) for B7, B8 bushing. 16 Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com info@e-switch.com PP 01-24 Toggle.qxd 5/6/02 1:51 PM Page 17 S E R I E S 200 S W I T C H E S SUB-MINIATURE TOGGLE SWITCHES BUSHING OPTIONS B1 THD B5 THD B2 NON-THD B6 NON-THD B3 THD B7 THD B4 NON-THD B8 NON-THD SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PANEL MOUNTING 10 - 48 Bushing Without locking ring 1/4 In. Bushing With std. locking ring Without locking ring With std. locking ring TERMINATION OPTIONS M1 M2 Epoxy Seal SINGLE POLE Phone: 763-504-3525 Epoxy Seal DOUBLE POLE Fax: 763-531-8235 Epoxy Seal Epoxy Seal SINGLE POLE www.e -switch.com DOUBLE POLE info@e-switch.com 17 PP 01-24 Toggle.qxd 5/6/02 1:52 PM Page 18 S E R I E S 200 S W I T C H E S SUB-MINIATURE TOGGLE SWITCHES P.C. MOUNTING (5PL) M6 SPDT P.C. MOUNTING M6 (8PL) P.C. MOUNTING (4PL) Switch Support M7 SPDT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. DPDT P.C. MOUNTING (7PL) M7 Switch Support DPDT 18 Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com info@e-switch.com PP 01-24 Toggle.qxd 5/6/02 1:52 PM Page 19 S E R I E S 200 S W I T C H E S SUB-MINIATURE TOGGLE SWITCHES P.C. MOUNTING VS2 SPDT 25° 2.54 [.100] POS. 2 POS. 1 8.13 E-SWITCH MARKING ON OPPOSITE SIDE 5.59 [.220] 3.01 [.119] Typ. DPDT 0.76 [.030] 1 2 3 0.41 [.016] 10.16 [.400] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 1.09 [.043] (3 PL) 8.64 [.340] 0.51 4.39 [.173] Flat VS2 P.C. MOUNTING 9.40 [.370] 6.10 [.240] 5.08 [.200] POS. 3 2.54 [.100] Typ. 0.51 [.020] 2.54 [.100] Typ. 10.16 [.400] CONTACT MATERIAL OPTIONS Q R Fixed Terminal: Silver plated copper alloy Moving Contact: Silver plated copper alloy Rating: 3 Amps @ 120 VAC or 28 VDC; 1 Amp @ 250 VAC Fixed Terminal Copper alloy with gold plate over nickel plate Moving Contact: Copper alloy with gold plate over nickel plate Rating: 0.4 VA max. @ 20 VAC or DC max. HARDWARE HDW21 8.08 Nut HDW21 Lock Washer .593 DIA 15.06 7.00 4.51 1.32 021 THK 0.55 Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com info@e-switch.com 19