KC13B7.002NLS_1

SERIES KC SWITCHES TACT SWITCHES ROTARY SWITCHES SPECIFICATIONS NAVIGATION SWITCHES Ratings: Life Expectancy: Contact Resistance: Dielectric Strength: Insulation Resistance: Operating Force: 350 mA @ 125 VAC 150 mA @ 250 VAC 10,000 cycles typical 25mΩ initial @ 2-4 VDC, 100mA 1,500 max V rms at sea level 100MΩ min. 8.6 N/cm TOGGLE SWITCHES PUSHBUTTON SWITCHES MATERIALS Housing, Base, Shaft: Glass filled nylon Silver plated copper alloy Gold flash over silver plate Hardware: Nut-Zinc, nickel plated Lockwasher–Steel, zinc plated Stop ring–Brass, nickel plated FEATURES & BENEFITS ROCKER SWITCHES 1 to 4 poles 1 to 12 positions No stop option APPLICATIONS/MARKETS Industrial controls Test & instrumentation Appliance HVAC Contact: SLIDE SWITCHES SERIES SNAP-ACTION SWITCHES KC See Model Options Table A=Flat B=Round D=Slotted See Actuator Option Chart 01 02* N=Non-Short S=Shorting P=PC Pin L=Solder Lug S F ▲ ▲ ▲ HOW TO ORDER MODEL NO. ACTUATOR ACUTATOR LENGTH BUSHING TIMING TERMINATION CONTACT MATERIAL DIP SWITCHES ▲ ▲ ▲ Example Ordering Number KC_ 13_ B_ 7.0_ 02_ N_ L_ S * Not available with #10 model. Specifications subject to change without notice. ROTARY SWITCHES KEYLOCK SWITCHES KC GENERAL INFORMATION CAP OPTIONS DETECTOR SWITCHES 232 Phone: 800-867-2717 Fax: 763-531-8235 MODEL NUMBER OPTIONS (SP Models) Sw. Func. 12-pos.-No stops ST DT 3 pos. 4 pos. 5 pos. 6 pos. 7 pos. 8 pos. 9 pos. 10 pos. 11 pos. 12 pos. 2 pos. -60° index 2 pos. -90° index 3 pos. -60° index 3 pos. -90° index 4 pos. -60° index 4 pos. -90° index 5 pos. -60° index 6 pos. -60° index (DP Models) Sw. Func. 6-pos.-No stops ST DT 3 pos. 4 pos. 5 pos. 6 pos. 2 pos. 60° index 2 pos. 90° index 2 pos. 60° index (3P Models) Sw. Func. 4-pos.-No stops ST DT 3 pos. 4 pos. 2 pos. 60° index 2 pos.-90° index (4P Models) Sw. Func. 3-pos.-No stops ST DT 3 pos. 2 pos. 60° index A FLAT B ROUND D SLOTTED Actuator A B D 30.0 30.0 0.0 Available Actuator Lengths (mm) 38.0 10.0 9.5 7.0 7.0 10.0 13.0 *All actuators shown in Pos. 1, fully CCW.. BUSHING OPTIONS 01 STANDARD 02 METRIC PANEL MOUNTING PANEL MOUNTING w ww.e-switch.com info @ e-switch.com CAP OPTIONS DETECTOR SWITCHES ROTARY SWITCHES KEYLOCK SWITCHES DIP SWITCHES SNAP-ACTION SWITCHES SLIDE SWITCHES ACTUATOR OPTIONS ROCKER SWITCHES Model 10 11 12 13 14 15 16 17 18 19 50 51 52 53 54 55 56 57 58 59 60 Terms A, 1-12 A, 2* A, 1,2* A, 1-3* A, 1-4* A, 1-5* A, 1-6* A, 1-7 A, 1-8 A, 1-9 A, 1-10 A, 1-11 A, 1-12 A, 1,3* A, 1,4* A, 1,3,5* A, 1,4,7 A,1,3,5,7 A,1,4,7,10** A,1,3,5,7,9 A,1,3,5,7,9,11 ** Note: Standard with stops All models 30° indexing unless otherwise noted. TOGGLE SWITCHES * Note: Switches with P terminations (PC pins) have additional terminal no. 9 as switch support only. This terminal is not connected electrically inside switch. Model 40 41 42 43 91 Terms all terms A,B,C,D,2,5,8,11 A,B,C,D,1,2,4,5,7,8,10,11 all terms A,B,C,D,1,3,4,6,7,9,10,12 PUSHBUTTON SWITCHES Model 20 21 22 23 24 25 26 70 71 72 Terms A,C,1-12 A, C,2,8 A,C,1,2,7,8 A,C 1-3, 7-9 A,C,1-4,7-10 A,C,1-5, 7-11 A,C,1-12 A,C,1,3,7,9 A,C,1,4,7,10 A,C,1,3,5,7,9,11 Model 30 31 32 33 34 80 81 Terms A,B,C,1-12 A,B,C,2,6,10 A,B,C,1,2,5,6,9,10 A,B,C,1-3,5-7,9-11 A,B,C,1-12 A,B,C,1,3,5,7,9,11 A,B,C,1,4,5,8,9,12 NAVIGATION SWITCHES TACT SWITCHES 233 SERIES KC SWITCHES TACT SWITCHES ROTARY SWITCHES SCHEMATICS AND PC MOUNTING PUSHBUTTON SWITCHES NAVIGATION SWITCHES SP 1 POLE, 12 POSITIONS 3P 3 POLE, 4 POSITIONS TOGGLE SWITCHES SCHEMATIC SCHEMATIC DP 2 POLE, 6 POSITION ROCKER SWITCHES 4P 4 POLE, 3 POSITIONS SLIDE SWITCHES SNAP-ACTION SWITCHES SCHEMATIC SCHEMATIC TIMING OPTIONS N= (STD.) Non-shorting – break before make S = Shorting – make before break Note: (S) shorting contacts available only with 30° indexing DIP SWITCHES TERMINATION OPTIONS KEYLOCK SWITCHES P PC PIN L SOLDER LUG DETECTOR SWITCHES ROTARY SWITCHES CONTACT MATERIAL OPTIONS CAP OPTIONS S = Standard Silver over copper alloy F = Gold Flash over silver plate over copper alloy 234 Phone: 800-867-2717 Fax: 763-531-8235