R1G120-AD13-02

EC centrifugal fan R1G120-AD13-02 backward-curved, single-intake ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 · D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership · Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart · HRA 590344 General partner Elektrobau Mulfingen GmbH · Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart · HRB 590142 Nominal data Type R1G120-AD13-02 Motor M1G045-BE Nominal voltage VDC 24 Nominal voltage range VDC 16 .. 28 Method of obtaining data fa Speed (rpm) min-1 4060 Power consumption W 26 Current draw A 1.2 Min. ambient temperature °C -25 Max. ambient temperature °C 50 ml = Max. load · me = Max. efficiency · fa = Free air · cs = Customer specification · ce = Customer equipment Subject to change Item no. 51184-5-9980 · ENU · Change 89188 · Approved 2016-10-26 · Page 1 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com EC centrifugal fan R1G120-AD13-02 backward-curved, single-intake Technical description Weight 0.5 kg Size 120 mm Motor size 45 Rotor surface Galvanized Impeller material PA66 plastic, glass-fiber reinforced Number of blades 9 Direction of rotation Clockwise, viewed toward rotor Degree of protection IP20 Insulation class "B" Moisture (F) / Environmental (H) protection class H0 - dry environment Max. permitted ambient temp. for motor (transport/storage) +80 °C Min. permitted ambient temp. for motor (transport/storage) -40 °C Installation position Any Condensation drainage holes None Mode S1 Motor mounting Ball bearing Technical features - Tach output - Soft start - Control input 0-10 VDC / PWM Motor protection Reverse polarity and locked-rotor protection With cable Axial Conformity with standards EN 60950-1 Approval EAC Item no. 51184-5-9980 · ENU · Change 89188 · Approved 2016-10-26 · Page 2 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com R1G120-AD13-02 EC centrifugal fan backward-curved, single-intake Product drawing 1 Cable PVC AWG22, 4x crimped splices 2 Accessory part: inlet ring 96120-2-4013 not included in scope of delivery 3 Max. clearance for screw 4 mm Item no. 51184-5-9980 · ENU · Change 89188 · Approved 2016-10-26 · Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com R1G120-AD13-02 EC centrifugal fan backward-curved, single-intake Connection diagram Item no. 51184-5-9980 · ENU · Change 89188 · Approved 2016-10-26 · Page 4 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com EC centrifugal fan R1G120-AD13-02 backward-curved, single-intake Curves: Air performance Druck p f s[Pa] für Rho=1,2kg/m^3 qv[cfm] 0 20 40 60 80 100 120 140 160 180 440 1,75 1,7 420 1,65 400 1,6 1,55 380 1,5 1,45 1,4 360 340 1,35 4 320 1,3 1,25 300 1,2 1,15 1,1 280 8 1,05 3 1 0,95 240 0,9 220 Measurement: LU-57724-1 Measurement: LU-57723-1 Measurement: LU-57725-1 Air performance measured according to ISO 5801 installation category A. For detailed information on the measurement setup, contact ebm-papst. Intake sound level: Sound power level according to ISO 13347 / sound pressure level measured at 1 m distance from fan axis. The values given are valid under the specified measuring conditions and may vary due to conditions of installation. For deviations from the standard configuration, the parameters have to be checked on the installed unit. 0,85 0,8 7 200 p fs_E [IN H2O] p f s[Pa] 260 0,75 180 0,7 0,65 160 0,6 12 140 0,55 0,5 2 120 11 0,45 6 100 0,4 0,35 80 0,3 0,25 0,2 10 60 40 0,15 20 40 60 80 100 120 140 160 qv[m^3/h] 180 5 200 220 240 260 ] [Pa fs 0 a] [P fs a] [P fs 9 0,1 0,05 p p p 20 0 1,8 1 280 300 Measured values U n Ped I qV pfs qV pfs V min-1 W A m3/h Pa cfm in. wg 1 28 4525 38 1.51 275 0 160 0.00 2 28 4510 38 1.52 215 123 125 0.49 3 28 4605 37 1.46 160 246 95 0.99 4 28 4780 34 1.35 105 320 60 1.28 5 24 4060 26 1.20 245 0 145 0.00 6 24 4055 28 1.30 195 100 115 0.40 7 24 4140 27 1.24 145 200 85 0.80 8 24 4275 25 1.15 95 260 55 1.04 9 16 2975 12 0.82 180 0 105 0.00 10 16 2965 12 0.83 140 52 85 0.21 11 16 3010 11 0.80 105 110 65 0.44 12 16 3095 10 0.74 70 139 40 0.56 U = Power supply · n = Speed (rpm) · Ped = Power consumption · I = Current draw · qV = Air flow · pfs = Pressure increase Item no. 51184-5-9980 · ENU · Change 89188 · Approved 2016-10-26 · Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com