RG125-19/56

Max. 94 m /h AC centrifugal fans 3  180 x 40 mm – Possible special versions: (See page 12) - Moisture protection - Salt spray protection - Degree of protection: IP 54 Scroll housing: GRP1) (PBT) Impeller: GRP1) (PA) Housing base: Sheet steel Direction of air flow: Centrifugal: discharge through window in housing Direction of rotation: Clockwise, looking towards rotor Connection: To 2 single wires AWG 22. Highlights: Backward-curved impeller Weight: 850 g – Material: – – – – – Temperature range Service life L10 at 40 °C 20.0 2 550 -30...+70 37 500 / 20 000 6.0 19.0 2 750 -30...+80 40 000 / 15 000 cfm VAC Hz Bel(A) RG 125-19/56 86 51 230 50 RG 125-19/06 94 55 115 60 Type Subject to change 2016-01 Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level LWA ISO 103002 measured on a hemisphere with a radius of 2 m. Sound pressure level LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions 236 Finger guards from p. 242 Tin-p la ted Hours Curve Nominal speed 5.8 m3/h Nominal data at T max Power consumption Hours Sound power level °C Frequency rpm-1 Nominal voltage Watts Air flow / Air flow Series RG 125 Sintec sleeve bearings Ball bearings 1) Fiberglass-reinforced plastic ¿ ¡