ECCM2

Marketing Bulletin DATE: TO: FROM: RE: Saturday, May 01, 1999 Affected Customers Marketing ECCM2 Series Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the ECCM2 series Ecliptek crystal effective Saturday, May 01, 1999. In compliance with our End of Life (EOL) policy, this notice will serve as advanced notice of product termination. New orders will not be accepted after Saturday, May 01, 1999, with delivery to be conclude by Saturday, May 01, 1999. If there are any questions pertaining to this bulletin, please contact your Ecliptek sales representative. Thank you again for your cooperation. Ecliptek Marketing 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 STANDARD SPECIFICATIONS Frequency Range: Frequency Tolerance/Stability: Blank J Shunt Capacitance (Co) Load Capacitance (CL) Blank XX S Mode of Operation Blank T Storage Temperature Drive Level Aging @ 25°C Insulation Resistance Shock: Vibration: Seal Integrity: Solderability: Marking Permenancy: Frequency Range 3.579 - 3.999 4.000 - 4.999 5.000 - 6.999 3.579545MHz to 70.000MHz ±50ppm at 25°C, ±100ppm over -10°C to +60°C ±30ppm at 25°C, ±50ppm over -10°C to +60°C 7pF Maximum 18pF Standard CL ≥ 12pF Series Fundamental from 3.579545MHz to 30.000MHz Third Overtone from 30.000MHz to 70.000MHz -30°C to +85°C 1 mWatt Maximum ±5ppm/year Maximum 500 Megaohms Minimum at 100Vdc ENVIRONMENTAL & MECHANICAL Conditions and Conditions and Conditions and Conditions and Conditions and ESR 150 130 80 Criteria Criteria Criteria Criteria Criteria Listed Listed Listed Listed Listed in TQC41-883-007 in TQC41-883-008 in TQC41-883-003 in TQC41-883-004 / 95% coverage in TQC41-883-001 ESR 60 45 30 Frequency Range 24.000 - 30.000 30.000 - 70.000 (3rd) ESR 30 100 FREQUENCY VS. EQUIVALENT SERIES RESISTANCE (ESR Ohms Maximum) Frequency Range 7.000 - 9.999 10.000 - 14.999 15.000 - 23.999 ALL DIMENSIONS IN MILLIMETERS 5.08 MAX 2.0 ±0.1 PAD CONNECTION 11.0 MAX 10.0 ±0.1 4.88 ±0.10 1.0 ±0.1 2.50 MAX 3.90 ±0.10 PART NUMBERING GUIDE ECCM2 J T - 20 - 30.000M TR Packaging Options Blank = Bulk TR = Tape & Reel (CPA70-071-000) MARKING GUIDE EXX.XXX Frequency in MHz EXX.XXX Frequency Load Capacitance Blank = 18pF (Standard) S = Series XX = XXpF Mode of Operation Blank = Fundamental T = Third Overtone Frequency Tolerance/Stability Blank = ±50ppm at 25°C, 100ppm over -10°C to +60°C J = ±30ppm at 25°C, 50ppm over -10°C to +60°C Title Note: Marking shall conform to conditions listed in TQC41-001-000. SPECIFICATION CONTROL DRAWING Drawing Number CCR30-002-000 2.5mm Ceramic Surface Mount Crystal Revision Effectivity Date B ECN Number 1858 Approved By PAGE 1 OF 1 Date Released By Date