ECCM32BAT-S-70.000MTR

Marketing Bulletin DATE: TO: FROM: RE: Monday, June 01, 1998 Affected Customers Marketing ECCM3 Series Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the ECCM3 series Ecliptek crystal effective Monday, June 01, 1998. In compliance with our End of Life (EOL) policy, this notice will serve as advanced notice of product termination. New orders will not be accepted after Thursday, April 01, 1999, with delivery to be conclude by Tuesday, June 01, 1999. The ECCM5 series is a recommended alternate for the ECCM3 series. This may not be an exact cross, so it is highly recommended that the data sheet(s) of the recommended alternate are reviewed and samples tested to ensure conformance. If there are any questions pertaining to this bulletin, please contact your Ecliptek sales representative. Thank you again for your cooperation. Ecliptek Marketing 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 STANDARD SPECIFICATIONS Frequency Range: Frequency Tolerance @ 25°C 2 3 4 5 Frequency Stability Shunt Capacitance (C0) Load Capacitance (CL) Mode of Operation Blank T Operating/Storage Temperature Drive Level Aging @ 25°C Equivalent Series Resistance Insulation Resistance Shock: Vibration: Seal Integrity: Solderability: Marking Permenancy: OPERATING TEMPERATURE Range Code -10°C to +60°C -20°C to +60°C 0°C to +70°C -10°C to +70°C -20°C to +70°C -30°C to +60°C -20°C to +80°C A B C D E F G 11.000MHz to 120.000MHz ±10ppm ±15ppm ±20ppm ±30ppm See Table 1 for Available Frequency Stabilities 5pF Maximum 18pF Standard, CL ≥ 10pF and Series Available Fundamental from 11.000MHz to 39.999MHz Third Overtone from 40.000MHz to 120.000MHz See Table 1 for Operating Temperature / -40°C to +85°C 100µWatts Maximum ±2ppm/year Maximum 30 Ohms Maximum 11.000MHz to 39.999MHz (Fundamental) 50 Ohms Maximum 40.000MHz to 120.000MHz (Third Overtone) 500 Megaohms Minimum at 100Vdc ENVIRONMENTAL & MECHANICAL Conditions and Conditions and Conditions and Conditions and Conditions and Criteria Listed in TQC41-883-007 Criteria Listed in TQC41-883-008 Criteria Listed in TQC41-883-003 Criteria Listed in TQC41-883-004 / 75% coverage Criteria Listed in TQC41-883-001 TABLE 1: PART NUMBERING CODES FREQUENCY STABILITY (PPM) X Denotes Availability A B C D E Code ±5 ±10 ±15 ±20 ±30 Range X X X X X X X X X X X X X X X X X X X X X X X 5.9 ±0.1 0.16 ±0.01 5.2 ±0.1 Ni: 3µ ±1µ Ni: 3µ ±1µ Au: 0.06µ - 0.6µ Ni: 3µ ±1µ Au: 0.06µ - 0.6µ Glass 6.7 ±0.1 1.5 ±0.1 2 0.60 ±0.08 PART NUMBERING GUIDE ECCM3 2 A B T - 20 - 70.000M TR Packaging Options Blank = Bulk 2.54 ±0.10 TR = Tape & Reel (CPA70-131-000) 1 PAD CONNECTIONS #1: CRYSTAL #2: NO CONNECT #3: CRYSTAL #4: NO CONNECT Frequency Load Capacitance Blank = 18pF (standard) S = Series, XX = XXpF Mode of Operation Blank = Fundamental T = Third Overtone Operating Temperature Range Code Per Table 1 Frequency Stability Code Per Table 1 Frequency Tolerance Code per Frequency Tolerance @ 25°C Listed Under Standard Specifications (2, 3, 4, or 5) 4 3.55 ±0.10 3 ALL DIMENSIONS IN MILLIMETERS SPECIFICATION CONTROL DRAWING Drawing Number MARKING GUIDE (Line #1) ECLIP (Line #2) XX.XXXM Frequency Title CCR31-002-000 ECLIP XX.XXXM XXYZZ 1.5mm GLASS SURFACE MOUNT CRYSTAL Revision Effectivity Date (Line #3) XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Code (TEN02-001-000) D ECN Number NOTE: Marking shall conform to conditions listed in TQC41-001-000. 2990 Approved By PAGE 1 OF 2 Date Released By Date