ECCM5B6FA-20-32.000M

Marketing Bulletin DATE: TO: FROM: RE: January 15th, 2007 All Sales Personnel Isaac Gonzalez Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective January 15th, 2008: Series ECCM5B Description 3.5x6.0mm Ceramic 2Pad SMD Crystal Recommended Replacement ECCM5A In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after January 1st, 2009, with delivery to conclude by April 1st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 ECCM5B Series • RoHS Compliant (Pb-Free) • Miniature two pad ceramic surface mount package • AT cut • Tight tolerance/stability • Frequencies to 32.000MHz available • Tape and reel available NOTES H L W ECCM5B 1.0 6.0 3.5 CRYSTAL _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ OBSOLETE _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ ______________________________________________________________________________________________ ______________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance Frequency Stability Operating Temperature Range Aging (at 25°C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) Spurious Response Frequency Range 11.0592MHz to 24.000MHz 24.001MHz to 32.000MHz MANUFACTURER CATEGORY 11.0592MHz to 32.000MHz ±30ppm, or ±50ppm Per Table 1 Per Table 1 ±2ppm / year Maximum -40°C to 85°C 5pF Maximum 500 Megaohms Minimum at 100VDC 100 µWatts Maximum 18pF (Standard), CL ≥10pF, or Series Resonant -3dB Minimum; F0 to F0 +5000ppm ESR (Ω) 50 Maximum 40 Maximum SERIES PACKAGE EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Mode / Cut Fundamental / AT Fundamental / AT CLASS REV.DATE ECLIPTEK CORP. CRYSTAL ECCM5B CERAMIC CR39 09/03 800-ECLIPTEK www.ecliptek.com for latest revision 38 Specifications subject to change without notice. PART NUMBERING GUIDE ECCM5B 5 D C - 20 - 32.000M TR FREQUENCY TOLERANCE (AT 25°C) 5=±30ppm, 6=±50ppm FREQUENCY STABILITY D=±20ppm, E=±30ppm, F=±50ppm OPERATING TEMPERATURE RANGE Per Table 1 PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard) S=Series, XX=XXpF (Custom) OBSOLETE MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pad 1: Input/Output Pad 2: Input/Output Tolerance = +0.2 TAPE A 16±.3 B 7.5±.1 C 6.75±.2 D 4 ±.1 E 2±.05 REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13±.2 Q 40 MIN QTY/REEL 1,000 F 8±.1 G 3.9±.1 H 1.5±.1 J 6.4±.1 K .3 ±.05 L 1.3±.1 R 2.5 MIN S 10 MIN T 22.4 MAX U 360 MAX V 16.4+2-0 ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS *Compliant to EIA-481A Line 1: E XX.XX Frequency in MHz (4 Digits Maximum + Decimal) Line 2: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL ECCM5B CERAMIC CR39 09/03 800-ECLIPTEK www.ecliptek.com for latest revision 39 Specifications subject to change without notice.