ECCM9

ECCM9 Series • RoHS Compliant (Pb-Free) • Miniature four pad ceramic surface mount package • Standard frequencies up to 53.125MHz • AT Cut • Tape and reel available NOTES H L W ECCM9 1.0 5.0 3.2 CRYSTAL _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Nominal Frequency (MHz) 10.000, 11.059, 11.0592, 11.2896, 11.700, 12.000, 12.1875, 12.272715, 12.288, 12.800, 13.000, 13.125, 13.225, 13.2256, 13.400, 13.480, 13.500, 13.560, 13.5652, 13.568, 13.5705, 13.57375, 13.589, 13.824, 14.000, 14.318, 14.31818, 14.3228, 14.400, 14.478, 14.47826, 14.484, 14.4844, 14.660, 14.745, 14.7456, 15.360, 16.000, 16.367, 16.368, 16.384, 16.800, 16.934, 16.9344, 17.000, 18.432, 19.200, 19.3125, 19.440, 19.500, 19.660, 19.6608, 19.680, 19.800, 20.000, 20.480, 21.250, 22.000, 23.104, 24.000, 24.545, 24.545451, 24.553, 24.576, 25.000, 25.140, 26.000, 27.000, 27.134, 28.375, 28.636, 28.6363, 28.63636, 29.491, 30.000, 32.000, 32.110, 33.000, 35.328, 36.000, 38.400, 39.062, 40.000, 40.283, 44.000, 45.000, 45.1584, 48.000, 48.600, 53.125MHz Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Load Capacitance (CL) Shunt Capacitance Mode of Operation Crystal Cut Aging (at 25°C) Drive Level Storage Temperature Range Insulation Resistance Spurious Response Equivalent Series Resistance ±50ppm / ±100ppm, ±30ppm / ±50ppm, ±15ppm / ±30ppm, ±15ppm / ±20ppm, or ±10ppm / ±15ppm 0°C to +70°C, -20°C to +70°C, or -40°C to +85°C Series Resonant 10pF Parallel Resonant to 50pF Parallel Resonant 7pF Maximum Fundamental AT-Cut ±3ppm / year Maximum 100µWatts Maximum, 10µWatts Correlation -40°C to +125°C 500 Megaohms Minimum at 100VDC -3dB Minimum; F0 to F0 +5000ppm 70 Ohms Maximum from 10.000MHz to 14.999MHz 60 Ohms Maximum from 15.000MHz to 19.999MHz 50 Ohms Maximum from 20.000MHz to 34.999MHz 40 Ohms Maximum from 35.000MHz to 53.125MHz MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL ECCM9 CERAMIC CR56 07/08 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE ECCM9 A A 10 - 32.000M TR FREQUENCY TOLERANCE/STABILITY A=±50ppm at 25°C, ±100ppm over 0°C to 70°C B=±50ppm at 25°C, ±100ppm over -20°C to 70°C C=±50ppm at 25°C, ±100ppm over -40°C to 85°C D=±30ppm at 25°C, ±50ppm over 0°C to 70°C E=±30ppm at 25°C, ±50ppm over -20°C to 70°C F=±30ppm at 25°C, ±50ppm over -40°C to 85°C G=±15ppm at 25°C, ±30ppm over 0°C to 70°C H=±15ppm at 25°C, ±30ppm over -20°C to 70°C J=±15ppm at 25°C, ±30ppm over -40°C to 85°C K=±15ppm at 25°C, ±20ppm over 0°C to 70°C L=±15ppm at 25°C, ±20ppm over -20°C to 70°C M=±15ppm at 25°C, ±20ppm over -40°C to 85°C N=±10ppm at 25°C, ±15ppm over 0°C to 70°C PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY LOAD CAPACITANCE S=Series Resonant XX=10pF Parallel Resonant to 50pF Parallel Resonant MODE OF OPERATION A=AT-Cut Fundamental MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS 3.2 ±0.2 MARKING ORIENTATION 3 5.0 ±0.2 4 2 1.4 ±0.1 1.2 ±0.1 (X4) 2 2.6 ±0.1 3 1 1.0 MAX 1 4 0.9 ±0.1 (X4) Note: Chamfer not shown. TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pad 1: Crystal Pad 2: Cover/Ground Pad 3: Crystal Pad 4: Cover/Ground Tolerance = +0.2 TAPE A 16±.3 B 7.5±.2 C 6.75±.2 D 4 ±.2 E 2±.2 REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13±.5 Q 40 MIN QTY/REEL 3,000 F 8±.2 G BO* H 1.5±.1 J AO* K .3 ±.05 L KO* R 2.5 MIN S 10 MIN T 22.4 MAX U 360 MAX V 16.4+2-0 ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS *Compliant to EIA-481A ESD Susceptibility Fine Leak Test Flammability Gross Leak Test Mechanical Shock Moisture Resistance Moisture Sensitivity Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Vibration MANUFACTURER MIL-STD-883, Method 3015, Class 1, HBM: 1500V MIL-STD-883, Method 1014, Condition A UL94-V0 MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 1004 J-STD-020, MSL 1 MIL-STD-202, Method 210, Condition K MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 2007, Condition A CATEGORY SERIES Line 1: E XX.XX Frequency in MHz (4 Digits Maximum + Decimal) Line 2: XXXXX Ecliptek Manufacturing Identifier PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL ECCM9 CERAMIC CR56 07/08 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.