ECDT-20-30.000M-GA

Marketing Bulletin DATE: TO: FROM: RE: May 1st, 2008 All Sales Personnel Isaac Gonzalez Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series EC Description Resistance Welded HC-49/U Crystal Recommended Replacement EU Series In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 EC Series • HC-49/U package • AT cut • Resistance weld seal • Tight tolerance/stability • Tape and reel, vinyl sleeve, insulator tab, third lead, and custom lead length options available NOTES EC H 13.58 L 11.18 W 4.70 CRYSTAL _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE 1.8432MHz to 65.000MHz _____________________________________________________________________________________________________________________________________________________________________________________________ _____________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Frequency Tolerance / Stability Over Operating Temperature Range Operating Temperature Range Aging (at 25°C) Storage Temperature Range Shunt Capacitance Insulation Resistance Drive Level Load Capacitance (CL) ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm, ±15ppm / ±30ppm, *±15ppm / ±20ppm, or ±10ppm / ±15ppm 0°C to 70°C (Standard), -20°C to 70°C, or -40°C to 85°C ±5ppm / year Maximum -40°C to 85°C 7pF Maximum 500 Megaohms Minimum at 100VDC 2 mWatts Maximum 18pF (Standard), Custom CL ≥ 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range 1.8432MHz to 1.999MHz 2.000MHz to 2.399MHz 2.400MHz to 2.999MHz 3.000MHz to 3.199MHz 3.200MHz to 3.499MHz 3.500MHz to 3.599MHz 3.600MHz to 3.899MHz 3.900MHz to 3.999MHz 4.000MHz to 4.099MHz MANUFACTURER ESR (Ω) 650 Max 550 Max 350 Max 250 Max 200 Max 180 Max 150 Max 120 Max 100 Max CATEGORY Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT SERIES Frequency Range 4.100MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 6.999MHz 7.000MHz to 7.999MHz 8.000MHz to 9.999MHz 10.000MHz to 12.999MHz 13.000MHz to 32.768MHz 24.000MHz to 29.999MHz 30.000MHz to 65.000MHz PACKAGE ESR (Ω) 80 Max 75 Max 50 Max 40 Max 35 Max 30 Max 25 Max 60 Max 40 Max CLASS Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Fundamental / AT Third Overtone / AT Third Overtone / AT REV.DATE ECLIPTEK CORP. CRYSTAL EC HC-49/U CR05 11/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC A T - 20 - 30.000M - G TR FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C H=±15ppm at 25°C, ±30ppm from -40°C to 85°C J=±15ppm at 25°C, ±20ppm from 0°C to 70°C K=±15ppm at 25°C, ±20ppm from -20°C to 70°C L=±15ppm at 25°C, ±20ppm from -40°C to 85°C M=±10ppm at 25°C, ±15ppm from 0°C to 70°C N=±10ppm at 25°C, ±15ppm from -20°C to 70°C PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel AVAILABLE OPTIONS Blank=None (Standard), CLXXX=Custom Lead Length(pp46) G=Gull Wing, G3=Gull Wing & Metal Jacket (pp47) I2=Insulator Tab (pp48) L=Third Lead(pp48) L2=Alternate Third Lead (pp48) V=Vinyl Sleeving (pp48) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series, XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, T=Third Overtone / AT MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS OBSOLETE TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION MARKING SPECIFICATIONS 1000 Pieces per Reel Compliant to EIA-468B Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: ECLIPTEK Line 2: E XX.XXXM Frequency in MHz (5 Digits Maximum + Decimal) E or Blank (No Marking) Line 3: XX Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC HC-49/U CR05 11/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.