ES51C1

ES51C1 Series • RoHS Compliant (Pb-free) • Temperature Compensated Crystal Oscillator (TCXO) • Clipped Sinewave Output • 5.0V Supply Voltage • Ceramic 10-pad SMD package • Stability to 1.0ppm • External voltage control option available ES51C1 H 2.0 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency (MHz) 10.000, 10.240, 10.245, 11.0592, 12.000, 12.288, 12.800, 13.000, 13.560, 14.000, 14.400, 14.7456, 15.360, 16.000, 16.03495, 16.3676, 16.367667, 16.3677, 16.368, 16.384, 16.800, 17.500, 18.432, 19.200, 19.440, 19.680, 19.800, 20.000, 20.480, 24.000, 24.5535, 25.000, and 26.000MHz Frequency Stability vs. Operating Temperature Range vs. Frequency Tolerance (25°C ±2°C, VDD = 5.0VDC, VC = 1.5VDC) vs. Input Voltage (±5%) vs. Load (±1kΩ//±1pF) Aging (at 25°C) Operating Temperature Range Supply Voltage (VDD) Input Current 10.000MHz to 14.999999MHz 15.000MHz to 25.999999MHz 26.000MHz to 26.000MHz Output Voltage Load Drive Capability External Trim (Voltage Control Option) Linearity Modulation Bandwidth Input Impedance Typical Phase Noise (at 12.800MHz) At offset of 10Hz At offset of 100Hz At offset of 1kHz At offset of 10kHz At offset of 100kHz Start Up Time Storage Temperature Range Measured at -3dB, VC = 1.5VDC 1.5VDC ±1.0VDC; Positive Transfer Characteristic See Part Numbering Guide ±1.0ppm Maximum ±0.2ppm Maximum ±0.2ppm Maximum ±1ppm / Year Maximum See Part Numbering Guide 5.0VDC ±5% 1.5mA Maximum 2.0mA Maximum 2.5mA Maximum 0.8Vp-p Clipped Sinewave Minimum 10kOhms // 10pF ±8ppm Minimum 10% Maximum 3kHz Minimum 100kOhms Minimum -80dBc/Hz -115dBc/Hz -135dBc/Hz -145dBc/Hz -145dBc/Hz 5mSec Maximum -55°C to 125°C MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR ES51C1 CERAMIC 5.0V OS4J 09/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE ES51C1 C 25 V - 13.000M TR OPERATING TEMPERATURE RANGE A=0°C to 50°C B=0°C to 70°C C=-20°C to 70°C D=-30°C to 85°C E=-40°C to 85°C FREQUENCY STABILITY 10 = ±1.0ppm Maximum 15 = ±1.5ppm Maximum 20 = ±2.0ppm Maximum 25 = ±2.5ppm Maximum PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel FREQUENCY EXTERNAL TRIM N=None (No Connection on Pin 1) V=Voltage Control MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Control Voltage or No Connect Pin 5: Case Ground Pin 6: Output Pin 10: Supply Voltage Pin 2-4, 7-9: Do Not Connect Tolerances= +0.1 TAPE A 16.0±0.2 B 7.5±0.1 C 6.75±0.1 D 4.0±0.1 E 2.0±0.1 F REEL M 1.5 MIN N 50 MIN O U 360 MAX P V 16.4+2-0 Q 40 MIN QTY/REEL 1,000 20.2 MIN 13.0±0.2 F 8.0±0.1 G H J A0* K 0.30 ±0.05 L K0* R 2.5 MIN S 10 MIN T 22.4 MAX B0* 1.5 +0.1-0.0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2003 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 MARKING SPECIFICATIONS Line 1: E XX.XXX Frequency in MHz (5 Digits Maximum + Decimal) Line 2: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR ES51C1 CERAMIC 5.0V OS4J 09/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.