ES52F2C10V-20.000M

Marketing Bulletin DATE: TO: FROM: RE: May 10, 2004 Affected Customers Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following Ecliptek series effective May 10th, 2004: Series EB51F2 ES51F2 EB52F2 ES52F2 Description 5V 14 Pin DIP TCXO, HCMOS 5V 14 Pin DIP TCXO, Sinewave 3.3V 14 Pin DIP TCXO, HCMOS 3.3V 14 Pin DIP TCXO, Sinewave Recommended Replacement None None None None Because of the circumstances surrounding this termination, there will be no end-of-life policy exercised. The series will be terminated with no purchasing or lifetime buy window available. We will however have a recommended alternative product for these series within the next ninety (90) days. All of us at Ecliptek Corporation apologize for any inconvenience this may have caused and can assure you we are taking measures to insure this will not happen again in the future. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you for your cooperation. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 OBSOLETE T PART NUMBERING GUIDE EB51F2 A 10 V - 20.000M MARKING GUIDE (Line #1) ECLIPTEK (Line #2) XX.XXXM 1 15.240 ±0.203 Frequency 7 0.6 MAX F r e (Line #3) XX Y ZZ q u 7.620 ±0.203 ∅0.457 ±0.100 (X4) 8 Week of Year Last Digit of Year Ecliptek Manufacturing Code (TEN02-001-000) NOTE: Pin 1 shall be marked with a dot. Marking shall conform to conditions listed in TQC41-001-000. 8 5.08 MIN ECLIPTEK XX.XXXM XXYZZ e N n 14 20.3 ±0.5 SPECIFICATION CONTROL DRAWING Drawing Number 13.0 ±0.5 CSC26-140-001 Title ALL DIMENSIONS IN MILLIMETERS 5.0V Full Size (VC)TCXO Revision Effectivity Date 5 PIN CONNECTION 1 No Connect or Voltage Control 7 Ground/Case Ground 8 Output 14 Supply Voltage A ECN Number 8159 Approved By PAGE 1 OF 2 Date Released By Date R S F Frequency Range: Frequency Tolerance/Stability: Initial Frequency Tolerance vs. Operating Temperature Range vs. Input Voltage Change vs. Load Change vs. Aging Operating Temperature Range Storage Temperature Range Supply Voltage (VDD ) Input Current (Steady State @25°C) Output Voltage Load Drive Capabillity Phase Noise (Typical) Frequency Deviation Control VoltageRange(VCR ) Control Voltage /TransferFunction Linearity Input Impedance 9.600MHz to 44.736MHz ±1ppm (at Nominal Vdd and Vc) See Table 1 for Maximum Values ±0.3ppm Maximum (V ±5% ±0.2ppm Maximum (±10%) ±1ppm/year Maximum (@25°C) See Table 1 for Operating Temperature Range -55°C to +125°C 5.0Vdc ±5% 10mA Maximum 1.0Vp-p Min Tj 2.752007T TaInpwav2.752 Tc (d) Tj -4 TD -0.0010kOhms//10pF.752 78 T* 82 OBSOLETE CRD r o zo eoVc)inao(@25°C)TVdd=(± 2.032 j -0.050.0171 0.015%) Tj 74-10.8 TD 0.0124Tj 63.36 102.7 Tj Tc (VcoV032 j -0.050.0171 TCharacteristic Tj 2.2161 Tc (m) T50c (±0.2p1Tj 2.7520.0) Tj 0 %10.56Tj -95Tc (1.0Vp-) Tj 2.752 (e) Tj -0.354811 Tc (Ma A Frequency Voltage Control Option CRc V = Voltage Control on Pin 1 N = No Connect on Pin 1 Frequency Stability Code Per Table 1 Operating Temperature Range Code Per Table 1 MARKING GUIDE (Line #1) ECLIPTEK (Line #2) XX.XXXM Frequency (Line #3) XX Y ZZ 1 ECLIPTEK XX.XXXM XXYZZ 15.240 ±0.203 7 0.6 MAX Week of Year Last Digit of Year Ecliptek Manufacturing Code (TEN02-001-000) NOTE: Pin 1 shall be marked with a dot. Marking shall conform to conditions listed in TQC41-001-000. 7.620 ±0.203 ∅0.457 ±0.100 (X4) 8 14 20.3 ±0.5 S 13.0 ±0.5 5.08 MIN C 8.3 MAX SPECIFICATION CONTROL DRAWING 2 6 PAGE 1 OF 2 E S 5 1 F 2 2 T R P i t l e e v i s i o OBSOLETE OBSOLETE 7 10 V - 20.000M ES52F2 A Tj -0.32156 .072(8 94.56468 132-) -0.072-9999Tj 9.3714Tj ET75 m 1001 V SPECIFICATION CONTROL DRAWING Drawing Number CSC26-170-001 Title 3.3V Clipped Sinewave Full Size (VC)TCXO Revision Effectivity Date A ECN Number 8165 Approved By PAGE 1 OF 2 Date Released By Date VT ± 1 0 c ( C ) T j -