1N6286BULK

www.eicsemi.com 1N6267 - 1N6303A TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 200 Volts PPK : 1500 Watts DO-201 FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical IR less then 1µA above 10V * Pb / RoHS Free 1.00 (25.4) MIN. 0.21 (5.33) 0.19 (4.83) 0.375 (9.53) 0.285 (7.24) 1.00 (25.4) MIN. 0.052 (1.07) 0.048 (0.97) MECHANICAL DATA * Case : DO-201 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.93 gram Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) Steady State Power Dissipation at TL = 75 °C Symbol Value Unit PPK 1500 W PD 5.0 W IFSM 200 A TJ, TSTG - 65 to + 175 °C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Note : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Lead area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 4 Rev. 02 : March 25, 2005 www.eicsemi.com ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It ( Note 1 ) Min. Max. It (mA) Working Peak Reverse Voltage VRWM (V) 1N6267 6.12 7.48 10 5.50 1000 139 10.8 0.057 1N6267A 6.45 7.14 10 5.80 1000 143 10.5 0.057 1N6268 6.75 8.25 10 6.05 500 128 11.7 0.061 1N6268A 7.13 7.88 10 6.40 500 132 11.3 0.061 1N6269 7.38 9.02 10 6.63 200 120 12.5 0.065 1N6269A 7.79 8.61 10 7.02 200 124 12.1 0.065 1N6270 8.19 10.0 1.0 7.37 50 109 13.8 0.068 1N6270A 8.65 9.55 1.0 7.78 50 112 13.4 0.068 1N6271 9.00 11.0 1.0 8.10 10 100 15.0 0.073 1N6271A 9.50 10.5 1.0 8.55 10 103 14.5 0.073 1N6272 9.90 12.1 1.0 8.92 5.0 93.0 16.2 0.075 Type No. VBR (V) Maximum Reverse Leakage @ VRWM IR (µA) Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of VBR (% / °C) 1N6272A 10.5 11.6 1.0 9.40 5.0 96.0 15.6 0.075 1N6273 10.8 13.2 1.0 9.72 5.0 87.0 17.3 0.078 0.078 1N6273A 11.4 12.6 1.0 10.2 5.0 90.0 16.7 1N6274 11.7 14.3 1.0 10.5 5.0 79.0 19.0 0.081 1N6274A 12.4 13.7 1.0 11.1 5.0 82.0 18.2 0.081 1N6275 13.5 16.5 1.0 12.1 5.0 68.0 22.0 0.084 1N6275A 14.3 15.8 1.0 12.8 5.0 71.0 21.2 0.084 1N6276 14.4 17.6 1.0 12.9 5.0 64.0 23.5 0.086 1N6276A 15.2 16.8 1.0 13.6 5.0 67.0 22.5 0.086 1N6277 16.2 19.8 1.0 14.5 5.0 56.5 26.5 0.088 1N6277A 17.1 18.9 1.0 15.3 5.0 59.5 25.2 0.088 1N6278 18.0 22.0 1.0 16.2 5.0 51.5 29.1 0.090 1N6278A 19.0 21.0 1.0 17.1 5.0 54.0 27.7 0.090 1N6279 19.8 24.2 1.0 17.8 5.0 47.0 31.9 0.092 1N6279A 20.9 23.1 1.0 18.8 5.0 49.0 30.6 0.092 1N6280 21.6 26.4 1.0 19.4 5.0 43.0 34.7 0.094 1N6280A 22.8 25.2 1.0 20.5 5.0 45.0 33.2 0.094 0.096 1N6281 24.3 29.7 1.0 21.8 5.0 38.5 39.1 1N6281A 25.7 28.4 1.0 23.1 5.0 40.0 37.5 0.096 1N6282 27.0 33.0 1.0 24.3 5.0 34.5 43.5 0.097 1N6282A 28.5 31.5 1.0 25.6 5.0 36.0 41.4 0.097 1N6283 29.7 36.3 1.0 26.8 5.0 31.5 47.7 0.098 1N6283A 31.4 34.7 1.0 28.2 5.0 33.0 45.7 0.098 1N6284 32.4 39.6 1.0 29.1 5.0 29.0 52.0 0.099 1N6284A 34.2 37.8 1.0 30.8 5.0 30.0 49.9 0.099 1N6285 35.1 42.9 1.0 31.6 5.0 26.5 56.4 0.100 1N6285A 37.1 41.0 1.0 33.3 5.0 28.0 53.9 0.100 1N6286 38.7 47.3 1.0 34.8 5.0 24.0 61.9 0.101 1N6286A 40.9 45.2 1.0 36.8 5.0 25.3 59.3 0.101 1N6287 42.3 51.7 1.0 38.1 5.0 22.2 67.8 0.101 1N6287A 44.7 49.4 1.0 40.2 5.0 23.2 64.8 0.101 1N6288 45.9 56.1 1.0 41.3 5.0 20.4 73.5 0.102 1N6288A 48.5 53.6 1.0 43.6 5.0 21.4 70.1 0.102 Page 2 of 4 Rev. 03 : March 31, 2005 www.eicsemi.com ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It ( Note 1 ) Min. Max. It (mA) Working Peak Reverse Voltage VRWM (V) 1N6289 50.4 61.6 1.0 45.4 5.0 18.6 80.5 0.103 1N6289A 53.2 58.8 1.0 47.8 5.0 19.5 77.0 0.103 1N6290 55.8 68.2 1.0 50.2 5.0 16.9 89.0 0.104 Type No. VBR (V) Maximum Reverse Leakage @ VRWM IR (µA) Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of VBR (% / °C) 1N6290A 58.9 65.1 1.0 53.0 5.0 17.7 85.0 0.104 1N6291 61.2 74.8 1.0 55.1 5.0 15.3 98.0 0.104 1N6291A 64.6 71.4 1.0 58.1 5.0 16.3 92.0 0.104 1N6292 67.5 82.5 1.0 60.7 5.0 13.9 108 0.105 1N6292A 71.3 78.8 1.0 64.1 5.0 14.6 103 0.105 1N6293 73.8 90.2 1.0 66.4 5.0 12.7 118 0.105 1N6293A 77.9 86.1 1.0 70.1 5.0 13.3 113 0.105 1N6294 81.9 100 1.0 73.7 5.0 11.4 131 0.106 1N6294A 86.5 95.5 1.0 77.8 5.0 12.0 125 0.106 1N6295 90.0 110 1.0 81.0 5.0 10.4 144 0.106 1N6295A 95.0 105 1.0 85.5 5.0 11.0 137 0.106 1N6296 99.0 121 1.0 89.2 5.0 9.5 158 0.107 1N6296A 105 116 1.0 94.0 5.0 9.9 152 0.107 1N6297 108 132 1.0 97.2 5.0 8.7 173 0.107 1N6297A 114 126 1.0 102 5.0 9.1 165 0.107 1N6298 117 143 1.0 105 5.0 8.0 187 0.107 1N6298A 124 137 1.0 111 5.0 8.4 179 0.107 1N6299 135 165 1.0 121 5.0 7.0 215 0.108 1N6299A 143 158 1.0 128 5.0 7.2 207 0.108 1N6300 144 176 1.0 130 5.0 6.5 230 0.108 1N6300A 152 168 1.0 136 5.0 6.8 219 0.108 1N6301 153 187 1.0 138 5.0 6.2 244 0.108 1N6301A 162 179 1.0 145 5.0 6.4 234 0.108 1N6302 162 198 1.0 146 5.0 5.8 258 0.108 1N6302A 171 189 1.0 154 5.0 6.1 246 0.108 1N6303 180 220 1.0 162 5.0 5.2 287 0.108 1N6303A 190 210 1.0 171 5.0 5.5 274 0.108 Notes: ( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 100 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 100 Amps. ( 100 Volts thru 200 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. Page 3 of 4 Rev. 03 : March 31, 2005 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( 1N6267 - 1N6303A ) FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 240 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 200 160 120 80 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 40 0 0 25 50 75 100 125 150 175 1 2 Ta, AMBIENT TEMPERATURE, ( °C) FIG.3 - STEADY STATE POWER DERATING 6 10 20 40 60 100 FIG.4 - PULSE RATING CURVE 5.00 100 Pp,PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) 4 NUMBER OF CYCLES AT 60Hz 3.75 2.50 1.25 Single Phase Half Wave 60 Hz Resistive or Inductive load 10 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) PEAK PULSE CURRENT - % IRMS FIG.5 - PULSE WAVEFORM Tr = 10µs 100 Peak Value IRMS TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - IRMS 2 50 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 4 of 4 Rev. 02 : March 25, 2005