BYVF32-150

BYVF32 Series PRV : 50 - 200 Volts Io : 18 Ampere FEATURES : * High current capability * High surge current capability * Low leakage, high voltage * Glass passivated chip junction * Pb / RoHS Free Dual Ultrafast Plastic Rectifiers ITO-220AB 0.134(3.4)DIA. 0.113(3.0)DIA. 0.112(2.85) 0.100(2.55) 0.406(10.3)MAX. 0.185(4.70)Max. 0.124(3.16)Max. 0.272(6.9) 0.248(6.3) 0.603(15.5) 0.573(14.8) 1 23 0.161(4.1)Max. 0.543(13.8) 0.512(13.2) 0.055(1.4)Max. 0.110(2.8) 0.098(2.5) MECHANICAL DATA : * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) 0.035(0.9)Max. 0.030(0.76)Max. 0.100(2.55) PIN 1 PIN 2 PIN 3 Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ta =25°C unless otherwise specified.) RATING Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current, Tc = 100°C Maximum Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at Tc = 100°C Maximum Instantaneous Forward Voltage per Leg at IF = 20A IF = 5.0A, Tj = 100°C Maximum Reverse Current per Leg at Rated DC Blocking Voltage Maximum Reverse Recovery Time per Leg (IF = 1A, VR = 30V , di/dt = 100A/µs, Irr = 10%IRM) Typical junction capacitance at 4V, 1MHz Maximum Thermal Resistance, Junction to Case Operating storage and temperature range IR IR(H) Trr Cj RθJC TJ, TSTG VF 1.15 0.85 10 (Tc = 25°C) 600 (Tc = 100°C) 35 85 3.0 - 55 to + 150 µA µA ns pF °C/W °C V IFSM 150 A SYMBOL BYVF32-50 VRRM VRMS VDC IF(AV) 50 35 50 BYVF32100 100 70 100 BYVF32-150 150 105 150 18 BYVF32200 200 140 200 UNIT V V V A Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( BYVF32 Series ) FIG.1 - FORWARD CURRENT DERATING CURRENT 24 150 Resistive or Inductive Load FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG Tj =150 °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 20 125 10ms SINGLE HALF SINE-WAVE (JEDEC) Method 16 10 12 75 8 50 4 25 0 0 25 50 75 100 125 150 175 0 1 2 4 6 10 20 40 60 100 CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 100 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ = 100 °C 10 10 1 TJ = 25 °C Pulse Width = 300 µ s 2% Duty Cycle 1 TJ = 25 °C 0.1 0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 – TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF 80 70 60 50 40 30 20 10 0 1 10 100 1000 TJ = 25°C f = 1.0 MHz Vsig = 50 mVp-p REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005