BZV55C16

BZV55C Series VZ : 2.4 to 75V PD : 500mW FEATURES : • Silicon planar zener diodes • For use as low voltage stabilizer or voltage reference. • Standard Zener voltage tolerance is ± 5% • Pb / RoHS Free ZENER DIODES MiniMELF (SOD-80C) Cathode Mark φ 0.063 (1.64) 0.055 (1.40) 0.019(0.48) 0.011(0.28) 0.142(3.6) 0.134(3.4) Mounting Pad Layout MECHANICAL DATA : * Case : MiniMELF Glass Case (SOD-80C) * Weight : 0.05 gram (approximately) 0.049 (1.25)Min. 0.098 (2.50) Max. 0.079 (2.00)Min. 0.197 (5.00) REF Dimensions in inches and ( millimeters ) Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Parameter Zener Current see Table "Characteristics" Maximum Forward Voltage at IF = 10 mA. Power Dissipation at Tflange = 50°C Power Dissipation at Ta = 50°C Continuous Forward Current Thermal Resistance Junction to Ambient Air Thermal Resistance Junction to Lead Peak reverse power dissipation (non-repetitive) tp = 100µs Junction temperature Storage temperature range Notes: (1) Mounted on ceramic substrate 10mm x 10mm x 0.6mm (2) Tj = 150°C Symbol VF PD PD IF RθJA RθJL PZSM TJ TS Value 0.9 500 400 1) 250 0.38(1) 0.3 30(2) -65 to + 200 -65 to + 200 Unit V mW mW mA °C/mW °C/mW W °C °C Page 1 of 2 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS (Ta = 25 °C unless otherwise noted) Type Zener Voltage VZ @ IZT 1) IZT Nom (V) (mA) 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 Maximum Zener Impedance , f = 1kHz ZZT @ IZT ZZk @ IZK IZK (Ω) (Ω) (mA) 100 100 95 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 40 45 55 55 70 80 80 80 90 130 150 170 180 200 215 240 255 600 600 600 600 600 600 600 500 480 400 150 80 80 80 100 150 150 150 170 200 200 225 225 250 250 300 300 325 350 350 375 375 400 425 450 475 500 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Maximum Reverse Leakage Current IR at VR (µA) (V) 50 20 10 5 5 3 3 3 2 1 3 2 1 0.7 0.5 0.2 0.1 0.1 0.1 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 1 1 1 1 1 1 1 2 2 2 4 4 5 5 6 7 8 8 8 10 11 13 14 15 17 19 21 23 25 27 30 33 36 39 43 48 53 Temp. coefficient of Zener Voltage α vz(% / °C) -0.08...-0.06 -0.08...-0.06 -0.08...-0.05 -0.08...-0.05 -0.08...-0.04 -0.07...-0.03 -0.04...-0.01 -0.03...+0.01 -0.02...+0.05 -0.01...+0.06 0.00...0.07 0.01...0.08 0.01...0.09 0.01...0.09 0.02...0.10 0.03...0.11 0.03...0.11 0.03...0.11 0.03...0.11 0.03...0.11 0.03...0.11 0.03...0.11 0.03...0.11 0.03...0.11 0.04...0.12 0.04...0.12 0.04...0.12 0.04...0.12 0.04...0.12 0.04...0.12 0.04...0.12 0.04...0.12 0.04...0.12 0.1 (typ.) 0.1 (typ.) 0.1 (typ.) 0.1 (typ.) BZV55C2V4 BZV55C2V7 BZV55C3V0 BZV55C3V3 BZV55C3V6 BZV55C3V9 BZV55C4V3 BZV55C4V7 BZV55C5V1 BZV55C5V6 BZV55C6V2 BZV55C6V8 BZV55C7V5 BZV55C8V2 BZV55C9V1 BZV55C10 BZV55C11 BZV55C12 BZV55C13 BZV55C15 BZV55C16 BZV55C18 BZV55C20 BZV55C22 BZV55C24 BZV55C27 BZV55C30 BZV55C33 BZV55C36 BZV55C39 BZV55C43 BZV55C47 BZV55C51 BZV55C56 BZV55C62 BZV55C68 BZV55C75 Notes : 1) Tested with pulses tp = 5 ms 2) Valid Provided that leads are kept at ambient temperature. 3) The type number listed have a standard tolerance on the nominal zener voltage of ± 5.0%. For ± 2% tolerance altered the sixth letter of type from "C" to be "B" Page 2 of 2 Rev. 02 : March 25, 2005