DR204T/R

www.eicsemi.com DR200 - DR210 SILICON RECTIFIER DIODES DO-15 PRV : 50 - 1000 Volts Io : 2.0 Amperes FEATURES : * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.142 (3.6) 0.102 (2.6) 0.300 (7.6) 0.230 (5.8) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : DO-15 Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.4 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL DR200 DR201 DR202 DR204 DR206 DR208 DR210 Maximum Repetitive Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 50 °C 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 UNIT 1000 V 560 700 V 800 1000 V IF 2.0 A IFSM 75 A VF 1.0 V Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at IF = 2.0 Amps. Maximum DC Reverse Current Ta = 25 °C at rated DC Blocking Voltage Ta = 100 °C Typical Junction Capacitance (Note1) IR 5.0 µA IR(H) 50 µA CJ 75 pF RθJA 20 °C/W Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Typical Thermal Resistance (Note2) Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 03 : February 28, 2014 www.eicsemi.com RATING AND CHARACTERISTIC CURVES (DR200 - DR210) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 75 8.3 ms SINGLE HALF SINE WAVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.6 1.2 0.8 0.4 RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 Ta = 50 °C 60 45 30 15 0 175 1 AMBIENT TEMPERATURE, ( °C) 100 FORWARD CURRENT, AMPERES 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS 10 1.0 Pulse Width = 300 µs 2% Duty Cycle 0.1 2 NUMBER OF CYCLES AT 60Hz TJ = 25 °C 10 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : February 28, 2014