FR107S

Fast Recovery Rectifiers FR101S ~ FR107S SOD-123FL ■ Features 1.1 0.8 2.95 2.60 ● Metal silicon junction, majority carrier conduction 1.9 1.7 ● For surface mounted applications ● Low power loss, high efficiency ● High forward surge current capability ● For use in low voltage, high frequency inverters, 0.2 0.1 1.40 1.20 free wheeling, and polarity protection applications 3.90 3.50 Dimensions in millimeters ■ Absolute Maximum Ratings and Electrical characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or inductive load, for capacitive load current derate by 20 %. Parameter Symbols FR101S FR102S FR103S FR104S FR105S FR106S FR107S Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage V RMS 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Instantaneous Forward Voltage at 1A VF 1.3 Maximum Averaged Forward Rectified Current IF(AV) 1 Peak Forward Surge Current, 8.3 ms Single Half Sine Wave Superimposed on Rated Load IFSM 30 Maximum DC Reverse Current Ta=25℃ at rated DC blocking voltage Ta=125℃ Typical Junction Capacitance *1 µA 100 Cj 15 pF Maximum Reverse Recovery Time *2 trr Typical Thermal Resistance *3 RᶿJA 85 ℃/W Tj ,Tstg -55 ~ +150 ℃ Operating and Storage Temperature Range 150 V A 5 IR Unit 250 500 ns * 1 Measured at 1MHz and applied reverse voltage of 4V D.C. * 2 Measured with IF = 0.5 A, IR = 1 A, Irr = 0.25 A. * 3 P.C.B. mounted with 2.0″×2.0″(5×5 cm) copper pad areas. ■ Marking NO. FR101S FR102S FR103S FR104S FR105S FR106S FR107S Marking F1 F2 F3 F4 F5 F6 F7 Page 1 of 2 Rev. 08 : February 25, 2013 ■ Typical Characterisitics Fig.2 Typical Reverse Characteristics 1.2 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60 Hz resistive or inductive load 0.0 25 50 75 100 125 150 175 Instaneous Reverse Current（μ A） Average Forward Current (A) Fig.1 Forward Current Derating Curve 100 1.0 T J =25°C 0.1 T J =25°C 1.0 0.1 pulse with 300μs 1% duty cycle 0.5 1.0 1.5 2.0 20 40 60 80 100 120 140 Fig.4 Typical Junction Capacitance Junction Capacitance ( pF) Instaneous Forward Current (A) Fig.3 Typical Instaneous Forward Characteristics 0.01 0.0 00 percent of Rated Peak Reverse Voltage (%) Case Temperature (°C) 10 T J =125°C 10 2.5 100 T J =25°C 10 1 0.1 1.0 10 100 Reverse Voltage (V) Instaneous Forward Voltage (V) Peak Forward Surage Current (A) Fig.5 Maximum Non-Repetitive Peak Forward Surage Current 35 30 25 20 15 10 05 00 8.3 ms Single Half Sine Wave (JEDEC Method) 1 10 100 Number of Cycles Page 2 of 2 Rev. 08 : February 25, 2013