GLZ5.6B

GLZ Series VZ : 3.3 to 39V PD : 500mW FEATURES : • Silicon Planar Zener Diodes • In MiniMELF case especially for automatic insertion • The Zener voltages are graded according to voltage bands instead of by tolerance. • Low Zener impedance and low leakage current • Pb / RoHS Free ZENER DIODES MiniMELF (SOD-80C) Cathode Mark φ 0.063 (1.64) 0.055 (1.40) 0.019(0.48) 0.011(0.28) 0.142(3.6) 0.134(3.4) Dimensions in inches and ( millimeters ) MECHANICAL DATA : * Case : MiniMELF Glass Case (SOD-80C) * W eight : 0.05 gram (approximately) Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Parameter Zener Current see Table "Characteristics" Power Dissipation Thermal Resistance Junction to Ambient Air Junction Temperature Range Storage Temperature Range Note : 1) Valid provided that electrodes are kept at ambient temperature. Symbol PD RθJA TJ TSTG Value 500 300 1) Unit mW °C/W °C °C 175 - 55 to + 175 Page 1 of 3 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Zener Voltage Type Rank Vz (V) at IZT min. max. 3.380 3.530 3.695 3.845 4.01 4.16 4.29 4.43 4.57 4.68 4.80 4.93 5.07 5.20 5.37 5.55 5.73 5.91 6.09 6.27 6.44 6.63 6.83 7.01 7.22 7.45 7.67 7.92 8.19 8.45 8.73 9.01 9.30 9.59 9.90 10.20 10.44 10.71 11.05 11.38 11.71 12.03 12.35 12.75 13.21 13.66 3.160 3.320 3.455 3.600 3.74 3.89 4.04 4.17 4.30 4.44 4.55 4.68 4.81 4.94 5.09 5.28 5.45 5.61 5.78 5.96 6.12 6.29 6.49 6.66 6.85 7.07 6.29 7.53 7.78 8.03 8.29 8.57 8.83 9.12 9.41 9.70 9.94 10.18 10.50 10.82 11.13 11.44 11.74 12.11 12.55 12.99 Test Current IZT (mA) 20 20 20 Maximum Zener Impedance , f = 1kHz ZZT @ IZT ZZK @ IZK IZK (mA) (Ω ) (Ω ) 70 60 50 1000 1000 1000 1 1 1 Maximum Reverse Current IR at VR (V) (µA) 20 10 5 1 1 1 GLZ3.3 GLZ3.6 GLZ3.9 GLZ4.3 GLZ4.7 GLZ5.1 GLZ5.6 GLZ6.2 GLZ6.8 GLZ7.5 A B A B A B A B C A B C A B C A B C A B C A B C A B C A B C A B C A B C D A B C A B C A B C 20 40 1000 1 5 1 20 25 900 1 5 1 20 20 800 1 5 1.5 20 13 500 1 5 2.5 20 10 300 1 5 3 20 8 150 0.5 2 3.5 20 8 120 0.5 0.5 4 GLZ8.2 20 8 120 0.5 0.5 5 GLZ9.1 20 8 120 0.5 0.5 6 GLZ10 20 8 120 0.5 0.2 7 GLZ11 20 10 120 0.5 0.2 8 GLZ12 20 12 110 0.5 0.2 9 GLZ13 10 14 110 0.5 0.2 10 Page 2 of 3 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Zener Voltage Type Rank Vz (V) at IZT min. max. 14.13 14.62 15.09 15.57 16.04 16.51 17.06 17.70 18.33 18.96 19.59 20.22 20.72 21.20 21.71 22.17 22.63 23.18 23.77 24.31 24.85 25.52 26.26 26.95 27.54 28.39 29.13 29.82 30.51 31.22 31.88 32.50 33.11 33.79 34.49 35.13 35.77 36.47 37.19 37.85 38.52 13.45 13.89 14.35 14.80 15.25 15.69 16.22 16.82 17.42 18.02 18.63 19.23 19.72 20.15 20.64 21.08 21.52 22.05 22.61 23.12 23.63 24.26 24.97 25.63 26.29 26.99 27.70 28.36 29.20 29.68 30.32 30.90 31.49 31.14 32.76 33.40 34.01 34.68 35.36 36.00 36.63 Test Current IZT (mA) 10 Maximum Zener Impedance , f = 1kHz ZZT @ IZT ZZK @ IZK IZK (mA) (Ω ) (Ω ) 16 110 0.5 Maximum Reverse Current IR at VR (V) (µA) 0.2 11 GLZ15 GLZ16 GLZ18 GLZ20 GLZ22 GLZ24 GLZ27 GLZ30 A B C A B C A B C A B C D A B C D A B C D A B C D A B C D A B C D A B C D A B C D 10 18 150 0.5 0.2 12 10 23 150 0.5 0.2 13 10 28 200 0.5 0.2 15 5 30 200 0.5 0.2 17 5 35 200 0.5 0.2 19 5 45 200 0.5 0.2 21 5 55 250 0.5 0.2 23 GLZ33 5 65 250 0.5 0.2 25 GLZ36 5 75 250 0.5 0.2 27 GLZ39 5 85 250 0.5 0.2 30 Notes: (1) The Zener voltage is measured 40ms after power is supplied. (2) Specify Zener voltage rank (A, B, C, or D) when ordering parts Page 3 of 3 Rev. 02 : March 25, 2005