GN2MT/R

www.eicsemi.com GN2A - GN2M GLASS PASSIVATED JUNCTION SILICON SURFACE MOUNT PRV : 50 - 1000 Volts Io : 2.0 Amperes SMB (DO-214AA) FEATURES : 4.65 ± 0.30 1.14 ± 0.38 Glass passivated chip High current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 5.30 ± 0.22 * * * * * * 0.1 ± 0.1 0.22 ± 0.07 2.1 ± 0.15 2.28 ± 0.15 MECHANICAL DATA : 3.62 ± 0.32 * Case : SMB Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.1079 gram Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL GN2A GN2B GN2D GN2G GN2J GN2K GN2M UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Ta = 50 °C IF(AV) 2.0 A IFSM 50 A VF 1.0 V IR 5.0 μA IR(H) 50 μA Typical Junction Capacitance (Note1) CJ 75 pF Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at IF = 2.0 Amps. Maximum DC Reverse Current Ta = 25 °C at rated DC Blocking Voltage Ta = 100 °C Note : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC Page 1 of 2 Rev. 03 : September 28, 2012 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( GN2A - GN2M ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 2.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.6 1.2 0.8 0.4 40 30 20 Ta = 50 °C 10 8.3 ms SINGLE HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 0 175 1 AMBIENT TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 10 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES TJ = 100 °C 10 1.0 Pulse Width = 300 μs 2% Duty Cycle 0.1 1.0 0.1 TJ = 25 °C 0.01 0 TJ = 25 °C 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : September 28, 2012