MBRA210L

www.eicsemi.com MBRA210L SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER PRV : 10 Volts Io : 2.0 Ampere SMA 0.170 (4.325) 0.168 (4.275) FEATURES : Ultra Low VF Highly Stable Oxidation Passivated Junction Guardring for Over-Voltage Protection Optimized for Low Leakage Current Lead Free / RoHS Pb / RoHS Free 0.099 (2.525) Max 0.007 (0.2) 0.077 (1.975) Max 0.009 (0.25) MECHANICAL DATA : 0.006 (0.175) * Case : SMA Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.067 gram * Marking : B2L1 0.004 (0.125) 0.071 (1.825) 0.069(1.775) 0.059 (1.51) 0.054 (1.39) 0.204 (5.20) 0.200 (5.10) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATING 0.079 (2.025) 0.097 (2.475) 0.049 (1.25) 0.037 (0.95) * * * * * * (Ta=25°C) SYMBOL VALUE UNIT Maximum Peak Repetitive Reverse Voltage VRRM 10 V Maximum Working Peak Reversr Voltage VRWM 10 V VDC 10 V IF(AV) 2.0 V IFSM 60 A Maximum DC Blocking Voltage Maximum Average Forward Current @TL = 110 °C Maximum Non-Repetitive Peak Surge Current (Surge Applied at Rate Load Conditions Halfwave, Single Phase, 60 Hz) Maximum Instantaneous Forward Voltage (Note 1) ( IF = 0.1 A ) ( IF = 1.0 A ) VF ( IF = 2.0 A ) Maximum Instantaneous Reverse Current (VR = 5V) IR (VR = 10V) Thermal Resistance TJ = 25°C) TJ = 100°C) 0.260 0.150 0.325 0.230 0.350 0.260 TJ = 25°C) TJ = 100°C) 0.25 40 0.70 60 Min Pad 1 Inch Pad Junction to Lead RθJL 22 15 Junction to Ambient RθJA 150 84 Operating Junction Temperature Range Storage Temperature Range V mA ºC/W TJ - 65 to + 150 ºC TSTG - 65 to + 150 ºC Note: ( 1 ) Pulse Test : Pulse Width ≤ 250 μs, Duty Cycle ≤ 2.0 %. Page 1 of 2 Rev. 05 : November 17, 2020 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( MBRA210L ) FIG.2 - TYPICAL JUNCTION CAPACITANCE JUNC TION CAPACITANCE, pF AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.1 - CURRENT DERATING, JUNCTION TO LEAD 4.0 3.5 RATED VOLTAGE APPLIED RθJL = 22°C/W TJ = 125°C dc 3.0 2.5 2.0 SQUARE WAVE 1.5 1.0 0.5 0 110 120 130 140 150 160 10000 1000 100 2 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 100 ºC 25 ºC 1 0.1 0.05 0.15 0.25 0.35 0.45 8 10 1.0 E-1 TJ = 125 ºC 75 ºC 6 FIG. 4 - TYPICAL REVERSE CURRENT FORWARD VOLTAGE 100 4 REVERSE VOLTAGE, VOLTS LEAD TEMPERATURE, (°C) FIG.3 - MAXIMUM INSTANTANEOUS INSTANTANEOUS FORWARD CURRENT, AMPERES 0 0.55 125 °C 1.0 E-2 100 °C 75 °C 1.0 E-3 0 1.0 E-4 25 °C 1.0 E-5 0.65 0 2 4 6 8 10 REVERSE VOLTAGE, VOLT INSTANTANEOUS FORWARD VOLTAGE, VOLTS AVERAGE POWER DISSIPATION, WATT FIG. 5 – FORWARD POWER DISSIPATION 0.8 0.7 0.6 dc 0.5 SQUARE WAVE 0.4 0.3 0.2 0.1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 AVERAGE FORWARD CURRENT, AMPERES Page 2 of 2 Rev. 05 : November 17, 2020