MURF1020CT

MURF1005CT THRU MURF1040CT PRV : 50 - 200 Volts Io : 10 Ampere FEATURES : * Ideally suited for free wheeling diode power factor correction applications * Soft recovery characteristics * Excellent high temperature switching * Glass passivated chip junction * Pb / RoHS Free Dual Ultrafast Plastic Rectifiers ITO-220AB 0.134(3.4)DIA. 0.113(3.0)DIA. 0.112(2.85) 0.100(2.55) 0.406(10.3)MAX. 0.185(4.70)Max. 0.124(3.16)Max. 0.272(6.9) 0.248(6.3) 0.603(15.5) 0.573(14.8) 1 0.543(13.8) 0.512(13.2) 23 0.161(4.1)Max. 0.055(1.4)Max. 0.110(2.8) 0.098(2.5) 0.035(0.9)Max. 0.030(0.76)Max. 0.100(2.55) MECHANICAL DATA : * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) PIN 1 PIN 2 PIN 3 Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Tc =25°C unless otherwise specified.) MURF RATING Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current, Tc = 100°C Maximum Peak Forward Surge Current, 8.3ms Single half sine wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage per Leg at IF = 5 A, Tj = 25°C Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (IF = 0.5A, IR = 1.0A, Irr = 0.25A ) Operating storage and temperature range Page 1 of 2 VF IR IR(H) Trr TJ, TSTG 0.95 5.0 (Tc = 25°C) 500 (Tc = 100°C) 35 - 65 to + 150 50 1.3 V µA µA ns °C Rev. 02 : March 25, 2005 IFSM 150 A SYMBOL 1005CT 1010CT 1015CT 1020CT 1030CT 1040CT UNIT 50 35 50 100 70 100 150 105 150 5.0 10 (Total Device) 200 140 200 300 210 300 400 280 400 V V V A VRRM VRMS VDC IF(AV) RATING AND CHARACTERISTIC CURVES ( MURF1005CT - MURF1040CT ) FIG.1 - MAXIMUM FORWARD CURRENT DERATING CURRENT 12 150 Resistive or Inductive Load 10 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Tj =150 °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 0 25 50 75 100 125 150 175 125 8 100 6 75 4 50 2 25 0 0 1 2 4 6 10 20 40 60 100 CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES MURF1005CT - MURF1020CT TJ = 100 °C 100 10 1 MURF1030CT MURF1040CT 10 TJ = 25 °C 1 0.1 TJ = 25 °C Pulse Width = 300 µ s 2% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 0.1 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Page 2 of 2 Rev. 02 : March 25, 2005