P6KE62ABULK

www.eicsemi.com P4KE SERIES TRANSIENT VOLTAGE SUPPRESSOR DO - 41 VBR : 6.8 - 550 Volts PPK : 400 Watts 1.00 (25.4) MIN. 0.108 (2.74) 0.078 (1.99) FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V * Pb / RoHS Free 0.205 (5.20) 0.160 (4.10) 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA Dimensions in inches and (millimeters) * Case : DO-41 Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.339 gram DEVICES FOR BIPOLAR APPLICATIONS For bi-directional use C or CA Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) Steady State Power Dissipation at TL = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Operating and Storage Temperature Range Symbol Value Unit PPK Minimum 400 W PD 1.0 W TJ, TSTG - 65 to + 175 °C Notes : (1) Non-repetitive Current pulse, per Fig. 2 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 in2 (40mm2). Page 1 of 4 Rev. 05 : July 29, 2014 www.eicsemi.com ELECTRICAL CHARACTERISTICS ( Rating at 25 °C ambient temperature unless otherwise specified) Breakdown Voltage @ It ( Note 1 ) Min. Max. It (mA) Working Peak Reverse Voltage VRWM (V) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 15.3 16.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 18.7 17.9 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 13.7 14.5 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 TYPE VBR (V) P4KE6.8 P4KE6.8A P4KE7.5 P4KE7.5A P4KE8.2 P4KE8.2A P4KE9.1 P4KE9.1A P4KE10 P4KE10A P4KE11 P4KE11A P4KE12 P4KE12A P4KE13 P4KE13A P4KE15 P4KE15A P4KE16 P4KE16A P4KE17 P4KE17A P4KE18 P4KE18A P4KE20 P4KE20A P4KE22 P4KE22A P4KE24 P4KE24A P4KE27 P4KE27A P4KE30 P4KE30A P4KE33 P4KE33A P4KE36 P4KE36A P4KE39 P4KE39A P4KE43 P4KE43A P4KE47 P4KE47A P4KE51 P4KE51A P4KE56 P4KE56A P4KE62 P4KE62A P4KE68 P4KE68A Page 2 of 4 Maximum Reverse Leakage @ VRWM IR (µA) Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of VBR 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 38.0 40.0 36.0 37.0 33.0 35.0 30.0 31.0 28.0 29.0 26.0 27.0 24.0 25.0 22.0 23.0 19.0 20.0 18.0 19.0 17.0 18.0 16.0 17.0 14.0 15.0 13.0 14.0 12.0 13.0 11.0 11.2 10.0 10.0 9.0 9.0 8.0 8.4 7.4 7.8 6.8 7.1 6.2 6.5 5.7 6.0 5.2 5.5 4.7 5.0 4.3 4.6 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 25.0 24.0 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.087 0.087 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 (% / °C) Rev. 05 : July 29, 2014 www.eicsemi.com ELECTRICAL CHARACTERISTICS ( Rating at 25 °C ambient temperature unless otherwise specified) Breakdown Voltage @ It ( Note 1 ) TYPE VBR (V) Min. Max. It (mA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Leakage @ VRWM IR (µA) P4KE75 67.5 82.5 1.0 60.7 5.0 P4KE75A 71.3 78.8 1.0 64.1 5.0 P4KE82 73.8 90.2 1.0 66.4 5.0 P4KE82A 77.9 86.1 1.0 70.1 5.0 P4KE91 81.9 100 1.0 73.7 5.0 P4KE91A 86.5 95.5 1.0 77.8 5.0 P4KE100 90.0 110 1.0 81.0 5.0 P4KE100A 95.0 105 1.0 85.5 5.0 P4KE110 99.0 121 1.0 89.2 5.0 P4KE110A 105 116 1.0 94.0 5.0 P4KE120 108 132 1.0 97.2 5.0 P4KE120A 114 126 1.0 102 5.0 P4KE130 117 143 1.0 105 5.0 P4KE130A 124 137 1.0 111 5.0 P4KE150 135 165 1.0 121 5.0 P4KE150A 143 158 1.0 128 5.0 P4KE160 144 176 1.0 130 5.0 P4KE160A 152 168 1.0 136 5.0 P4KE170 153 187 1.0 138 5.0 P4KE170A 162 179 1.0 145 5.0 P4KE180 162 198 1.0 146 5.0 P4KE180A 171 189 1.0 154 5.0 P4KE200 180 220 1.0 162 5.0 P4KE200A 190 210 1.0 171 5.0 P4KE220 198 242 1.0 175 5.0 P4KE220A 209 231 1.0 185 5.0 P4KE250 225 275 1.0 202 5.0 P4KE250A 237 263 1.0 214 5.0 P4KE300 270 330 1.0 243 5.0 P4KE300A 285 315 1.0 256 5.0 P4KE330 297 363 1.0 267 5.0 P4KE330A 314 347 1.0 283 5.0 P4KE350 315 385 1.0 284 5.0 P4KE350A 332 368 1.0 300 5.0 P4KE400 360 440 1.0 324 5.0 P4KE400A 380 420 1.0 342 5.0 P4KE440 396 484 1.0 356 5.0 P4KE440A 418 462 1.0 376 5.0 P4KE480 432 528 1.0 389 5.0 P4KE480A 456 504 1.0 408 5.0 P4KE510 459 561 1.0 413 5.0 P4KE510A 485 535 1.0 434 5.0 P4KE540 486 594 1.0 437 5.0 P4KE540A 513 567 1.0 459 5.0 P4KE550 495 605 1.0 445 5.0 P4KE550A 522 577 1.0 470 5.0 Notes: (1) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. (2) For Bipolar types having VR of 10 Volts and under, the IR limit is doubled. (3) "4KE" will be omitted in marking on the diode. Page 3 of 4 Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of VBR 3.9 4.1 3.6 3.7 3.2 3.4 2.9 3.1 2.7 2.8 2.4 2.5 2.2 2.3 2.0 2.0 1.8 1.9 1.7 1.8 1.6 1.7 1.5 1.53 1.16 1.22 1.11 1.16 0.93 0.97 0.84 0.88 0.79 0.83 0.70 0.73 0.63 0.66 0.58 0.61 0.55 0.57 0.52 0.54 0.50 0.53 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 476 455 504 482 574 548 631 602 686 658 729 698 772 740 800 754 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 (% / °C) Rev. 05 : July 29, 2014 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( P4KE SERIES ) FIG.2 - PULSE WAVEFORM PEAK PULSE CURRENT - % IPPM PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 120 100 80 60 40 20 tr = 10µs 100 Peak Value IPPM Half Value - IPPM 2 50 10x1000 µs Waveform as defined by R.E.A. 0 0 0 25 50 75 100 125 150 175 tp 0 3.0 2.0 1.0 Ta, AMBIENT TEMPERATURE, ( °C) 4.0 T, TIME(ms) FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE 1.00 100 Pp,PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) Ta=25 °C Pulse Width (td) is defined as that point where the peak current decays to 50% of IPPM 0.75 0.50 0.25 Single Phase Half Wave 60 Hz Resistive or Inductive load 10 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) Page 4 of 4 Rev. 05 : July 29, 2014