S5295G

S5295B/G/J PRV : 100 - 600 Volts Io : 0.5 Ampere FEATURES : * * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free FAST RECOVERY RECTIFIERS DO - 41 0.107 (2.7) 0.080 (2.0) 1.00 (25.4) MIN. 0.205 (5.2) 0.166 (4.2) MECHANICAL DATA : * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.339 gram 0.034 (0.86) 0.028 (0.71) 1.00 (25.4) MIN. Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING Maximum Repetitive Peak Reverse Voltage Maximum Reverse Voltage (DC) Maximum Average Forward Current Maximum Peak One Cycle Surge Forward Current SYMBOL VRRM VR IF(AV) S5295B 100 75 S5295G 400 300 0.5 S5295J 600 500 UNIT V V A IFSM ( 50 Hz, Non-Repetitive ) Maximum Peak Forward Voltage at IF = 1.0 A Maximum Repetitive Peak Reverse Current at VRRM Maximum Reverse Recovery Time (Note 1) Junction Temperature Range Storage Temperature Range Notes : (1) Reverse Recovery Test Condition : IF = 20 mA, IR = 1mA 30 A VF IR Trr TJ TSTG 1.5 10 1.5 - 40 to + 125 - 40 to + 125 V µA µs °C °C Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( S5295B/G/J ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM R L Tr DUT IFM VR VF 1Ω Tr1 50 Ω CRO Tr2 di/dt 0.1xIRP IRP FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.5 50 FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 0.4 40 0.3 30 0.2 20 0.1 10 0 0 25 50 75 100 125 150 175 0 1 2 4 6 10 20 40 60 100 AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 50Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS REVERSE CURRENT, MICROAMPERES 10 FIG.5 - TYPICAL REVERSE CHARACTERISTICS 100 TJ = 100 °C FORWARD CURRENT, AMPERES 10 1.0 1.0 0.1 TJ = 25 °C TJ = 25 °C 0.1 0.4 0.01 0 20 40 60 80 100 120 140 0.8 1.2 1.6 2.0 2.4 2.8 3.0 FORWARD VOLTAGE, VOLTS PERCENT OF RATED REVERSE VOLTAGE, (%) Page 2 of 2 Rev. 02 : March 25, 2005