TPSMC8.2A

TPSMC6.8 ~ TPSMC43A VBR : 6.8 - 43 Volts PPK : 1500 Watts AUTOMOTIVE SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMC (DO-214AB) 0.060(1.52) 0.030(0.76) 0.3 05(7.75) 0.320(8.13) 0.280(7.11) FEATURES : * 1500W peak pulse power capability with a 10/1000ms waveform, repetition rate (duty cycle): 0.01% * Excellent clamping capability * Low incremental surge resistance * Very fast response time * For devices with V(BR) ? 10V ID are typically less than 1.0mA at Ta = 150?C * Pb / RoHS Free 0.260(6.60) 0.008(0.203) 0.004(0.102) 0.121(3.07) 0.115(2.92) 0.245(6.22) 0.220(5.59) 0.103(2.62 ) 0.079(2.00 ) 0.012(0.305) 0.006(0.152) Dimensions in inches and (millimeter) MECHANICAL DATA * Case : SMC Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.21 grams Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Parameter Peak Pulse Power Dissipation with a 10/1000 µs waveform (1)(2) Fig.5 Peak power pulse current with a 10/1000?s waveform (1) Fig.2 Peak Forward Surge Current, 8.3ms Single Half Sine-Wave (2)(3) Maximum instantaneous forward voltage at 100A(3) Operating and Storage Temperature Range Symbol PPPM IPPM IFSM VF TJ, TSTG Value Minimum 1500 See Next Table 200 3.5 - 65 to + 185 Unit W A A V °C Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal (3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum Page 1 of 3 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Working Peak Reverse Voltage V RWM (V) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 Maximum Reverse Leakage @ V RWM IR (µA) 1000 1000 500 500 200 200 50 50 20 20 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Maximum Reverse Leakage @ V RWM, Tj=150 °C ID (µA) 10000 10000 5000 2000 2000 500 500 200 200 50 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Maximum Peak Pulse Surge Current IPPM(2) (A) 139 143 128 132 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 Maximum Clamping Voltage @ I PPM V RSM (V) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 Type Breakdown Voltage @ It (Note 1) V BR (V) Min. Max. It (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 TPSMC6.8 TPSMC6.8A TPSMC7.5 TPSMC7.5A TPSMC8.2 TPSMC8.2A TPSMC9.1 TPSMC9.1A TPSMC10 TPSMC10A TPSMC11 TPSMC11A TPSMC12 TPSMC12A TPSMC13 TPSMC13A TPSMC15 TPSMC15A TPSMC16 TPSMC16A TPSMC18 TPSMC18A TPSMC20 TPSMC20A TPSMC22 TPSMC22A TPSMC24 TPSMC24A TPSMC27 TPSMC27A TPSMC30 TPSMC30A TPSMC33 TPSMC33A TPSMC36 TPSMC36A TPSMC39 TPSMC39A TPSMC43 TPSMC43A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 Notes : (1) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. (2) Surge current waveform per Fig. 5 and derate per Fig. 1 (3) "PSMC" will be omitted in marking on the diode. Page 2 of 3 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( TPSMC6.8 - TPSMC43A ) FIG.1 - PULSE DERATING CURVE 120 PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE (%) FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 200 100 PEAK FORWARD SURGE CURRENT, AMPERES 100 80 80 60 60 40 40 TJ = TJ max 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 20 0 0 25 50 75 100 125 150 175 20 0 1 2 4 6 10 20 40 60 100 Ta, AMBIENT TEMPERATURE, ( °C) FIG.3 - TYPICAL JUNCTION CAPACITANCE 10000 TJ = 25C f = 1MHz Vsig = 50mVp-p 1000 VR measured at zero bias NUMBER OF CYCLES AT 60Hz FIG.4 - PULSE RATING CURVE CJ - JUNCTION CAPACITANCE , pF 100 Pp,PEAK POWER (kW) 10 100 VR measured at stand-off voltage, VWM 1.0 Ta = 25?C Non-repetitive pulse waveform shown in Fig. 5 10 1 10 100 200 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms V(BR) , BREAKDOWN VOLTAGE (V) td, PULSE WIDTH FIG.5 - PULSE WAVEFORM Tr = 10µs TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM IPPM, PEAK PULSE CURRENT - % 100 Peak Value IPPM 50 Half Value - IPPM 2 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 t, TIME(ms) Page 3 of 3 Rev. 02 : March 25, 2005