ELM13403CA

20 -5V -10V 15 -4.5V -4V 10 Vds=-5V 8 25°C -Id (A) 10 -3V 5 2 5V -2.0V 0 0 1 2 3 4 5 -Vds (Volts) Fig 1: On-Region Characteristics 250 Vgs=-2.5V -Id (A) Vgs=-3.5V 6 125°C 4 2 0 0 0.5 1 1.5 2 2.5 3 3.5 4 -Vgs (Volts) Figure 2: Transfer Characteristics 1.6 Normalized On-Resistance Vgs=-10V 1.4 VGS=-4.5V VGS=-2.5V 1.2 Rds(on) (m: ) 200 150 Vgs=-4.5V 100 1 ID=-2A 50 0 1 2 3 Vgs=-10V 4 5 6 0.8 0 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature -Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 300 250 1.0E+01 1.0E+00 Id=-2A 1.0E-01 125°C Rds(on) (m: ) 200 150 100 50 0 0 2 4 -Is (A) 125°C 1.0E-02 1.0E-03 25°C 1.0E-04 25°C 1.0E-05 6 8 10 1.0E-06 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -Vsd (Volts) Figure 6: Body-Diode Characteristics -Vgs (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage 5 Vds=-15V Id=-2.5A 4 600 500 Ciss Capacitance (pF) -Vgs (Volts) 400 300 200 Coss 100 0 Crss 3 2 1 0 0 1 2 3 4 5 -Qg (nC) Figure 7: Gate-Charge Characteristics 0 5 10 15 20 25 30 -Vds (Volts) Figure 8: Capacitance Characteristics 100.0 Tj(max)=150°C Ta=25°C 100Ps 1ms 0.1s 10ms 20 Tj(max)=150°C Ta=25°C 15 -Id (Amps) Power (W) 10.0 Rds(on) limited 10Ps 10 1.0 1s 10s DC 0.1 0.1 1 -Vds (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 10 100 5 0 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 10 ZTja Normalized Transient Thermal Resistance D=Ton/T Tj,pk=Ta+Pdm.ZTja.RTja RTja=90°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 Pd Ton Single 0.0001 Pulse 0.001 0.01 0.1 1 0.01 0.00001 T 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance