ELM13405CA

20 -10V 15 -4.5V 10 Vds=-5V 8 -Id (A) 10 -4V 5 -3.5V -Id (A) 6 4 125°C 2 25°C 0 Vgs=-3V 0 0 1 2 3 4 5 -Vds (Volts) Fig 1: On-Region Characteristics 200 1.6 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 -Vgs (Volts) Figure 2: Transfer Characteristics Normalized On-Resistance 180 160 Vgs=-10V 1.4 Vgs=-4.5V 1.2 Id=-2A 1 Rds(on) (m: ) 140 120 100 80 60 40 0 1 2 3 Vgs=-4.5V Vgs=-10V 0.8 4 5 6 0 25 50 75 100 125 150 175 -Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 400 350 300 Id=-2A 1.0E+01 1.0E+00 125°C 1.0E-01 Rds(on) (m: ) -Is (A) 250 200 150 100 50 0 2 4 6 8 10 -Vgs (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage 125°C 1.0E-02 1.0E-03 25°C 1.0E-04 25°C 1.0E-05 1.0E-06 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -Vsd (Volts) Figure 6: Body-Diode Characteristics 5 Vds=-15V Id=-2.5A 800 4 Capacitance (pF) 600 Ciss 400 -Vgs (Volts) 3 2 1 200 Coss Crss 0 0 1 2 3 4 5 -Qg (nC) Figure 7: Gate-Charge Characteristics 0 0 5 10 15 20 25 30 -Vds (Volts) Figure 8: Capacitance Characteristics 100.0 Tj(max)=150°C Ta=25°C Rds(on) limited 40 10Ps Tj(max)=150°C Ta=25°C 30 -Id (Amps) 1ms 0.1s 1.0 1s 10s DC 0.1 0.1 1 -Vds (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 10 100 10ms Power (W) 10.0 100Ps 20 10 0 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 10 ZTja Normalized Transient Thermal Resistance D=Ton/T Tj,pk=Ta+Pdm.ZTja.RTja RTja=90°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 Pd Ton T Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance