ELM13410CA

25 10V 20 4.5V 2.5V 3V 20 16 Vds=5V Id (A) Id(A) 15 12 10 Vgs=2V 8 125°C 4 25°C 5 0 0 1 2 3 4 5 Vds (Volts) Fig 1: On-Region Characteristics 60 50 0 0 0.5 1 1.5 2 2.5 3 Vgs(Volts) Figure 2: Transfer Characteristics 1.8 Normalized On-Resistance 1.6 Vgs=4.5V 1.4 Vgs=10V Rds(on) (m: ) 40 30 20 10 0 5 Vgs=2.5V Vgs=4.5V 1.2 Vgs=2.5V Vgs=10V 1 10 15 20 0.8 0 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 70 60 Id=5A 1.0E+01 1.0E+00 1.0E-01 125°C Rds(on) (m: ) 50 40 30 Is (A) 125°C 1.0E-02 1.0E-03 25°C 1.0E-04 20 10 0 2 4 25°C 1.0E-05 1.0E-06 6 8 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Vgs (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage Vsd (Volts) Figure 6: Body-Diode Characteristics 5 Vds=15V Id=5A 4 1400 1200 Capacitance (pF) 1000 Ciss 800 600 400 Coss 200 Crss Vgs (Volts) 3 2 1 0 0 2 4 6 8 10 12 Qg (nC) Figure 7: Gate-Charge Characteristics 0 0 5 10 15 20 25 30 Vds (Volts) Figure 8: Capacitance Characteristics 100.0 Tj(max)=150°C Ta=25°C Rds(on) 10.0 limited 100Ps 1ms 0.1s 1.0 1s 10s DC 0.1 0.1 1 Vds (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 10 100 10ms 40 Tj(max)=150°C Ta=25°C 30 Power (W) Id (Amps) 20 10 0 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 10 ZTja Normalized Transient Thermal Resistance D=Ton/T Tj,pk=Ta+Pdm.ZTja.RTja RTja=90°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 Pd Ton T Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance