ELM13419CA-S

25 -9.0V -8.0V 20 -7.0V -6.0V -4.0V -3.0V 10 -2.5V -2.0V Vgs=-1.5V 0 0 1 2 3 4 5 -Vds (Volts) Fig 1: On-Region Characteristics 160 Vgs=-2.5V -10.0V -5.0V 10 Vds=-5V 8 -Id (A) -Id (A) 15 6 4 125°C 5 2 25°C 0 0 0.5 1 1.5 2 2.5 3 3.5 -Vgs (Volts) Figure 2: Transfer Characteristics 1.6 Id=-3A, Vgs=-4.5V Normalized On-Resistance 140 Rds(on) (m:) 120 100 80 60 Vgs=-10V 40 20 0 2 4 6 8 10 Vgs=-4.5V 1.4 Id=-3.5A, Vgs=-10V 1.2 Id=-1A, Vgs=-2.5V 1.0 0.8 0 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature -Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 200 180 160 Id=-3.5A 1E+01 1E+00 125°C 1E-01 125°C Rds(on) (m:) -Is (A) 140 120 100 80 60 40 0 2 4 6 1E-02 1E-03 1E-04 25°C 25°C 1E-05 1E-06 8 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -Vsd (Volts) Figure 6: Body-Diode Characteristics -Vgs (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage 5 Id=-3.5A 800 4 3 Capacitance (pF) 600 Ciss -Vgs (Volts) 400 2 1 200 Crss 0 0 1 2 3 4 5 6 0 Coss 0 -Qg (nC) Figure 7: Gate-Charge Characteristics 5 10 15 20 -Vds (Volts) Figure 8: Capacitance Characteristics 100.0 Tj(max)=150°C Ta=25°C Rds(on) limited 40 10Ps 30 Tj(max)=150°C Ta=25°C -Id (Amps) Power (W) 10.0 100Ps 1ms 20 1.0 1s 10s DC 0.1 0.1 1 -Vds (Volts) 10 10ms 0.1s 10 100 0 0.001 0.01 0.1 1 10 100 1000 Figure 9: Maximum Forward Biased Safe Operating Area (Note E) Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 10 ZTja Normalized Transient Thermal Resistance D=Ton/T Tj,pk=Ta+Pdm.ZTja.RTja RTja=90°C/W 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 Pd Ton Single Pulse T 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance