ELM14414AA-N

30 10V 25 20 6V 4.5V 5V 4V 20 Vds=5V 16 Id (A) 12 15 3.5V 10 5 0 0 1 2 3 4 5 Vds (Volts) Fig 1: On-Region Characteristics 45 1.6 Vgs=10V Vgs=4.5V Vgs=3V 4 Id(A) 8 125°C 25°C 0 1.5 2 2.5 3 3.5 4 4.5 Vgs(Volts) Figure 2: Transfer Characteristics Normalized On-Resistance 40 35 30 25 20 15 0 5 10 1.4 Vgs=4.5V 1.2 Rds(on) (m: ) 1 Vgs=10V 15 20 0.8 0 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 60 1.0E+01 1.0E+00 Id=5A 1.0E-01 125°C 50 Rds(on) (m: ) Is (A) 40 125°C 1.0E-02 25°C HIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL 30 1.0E-03 25°C OMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISIN UT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, 20 1.0E-04 UNCTIONS AND RELIABILITY WITHOUT NOTICE. 10 2 4 6 8 10 Vgs (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage 1.0E-05 0.0 0.2 0.4 0.6 0.8 1.0 Vsd (Volts) Figure 6: Body-Diode Characteristics 10 8 Vds=15V Id=8.5A 1000 800 6 4 2 0 0 2 4 6 8 10 12 14 Qg (nC) Figure 7: Gate-Charge Characteristics Capacitance (pF) Ciss 600 Vgs (Volts) 400 Coss 200 Crss 0 5 10 15 20 25 30 0 Vds (Volts) Figure 8: Capacitance Characteristics 100.0 Rds(on) limited 100 Ps 1ms 10ms 0.1s 1.0 Tj(max)=150°C Ta=25°C 0.1 0.1 1 Vds (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 10 100 1s 10s DC 50 10Ps 40 Tj(max)=150°C Ta=25°C Id (Amps) Power (W) 10.0 30 20 10 0 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 10 ZTja Normalized Transient Thermal Resistance D=T on/T Tj,pk=T a+Pdm.ZTja.RTja RTja=40°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 HIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL Pd OMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISIN 0.1 UNCTIONS AND RELIABILITY WITHOUT NOTICE. Single Pulse 0.01 0.00001 0.0001 0.001 UT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, Ton T 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance