ELM14415AA-N

30 -10V 25 20 -7V -6V 25 Vds=-5V 20 -Id (A) 15 10 -5V -4.5V -Id(A) 15 10 125°C 5 Vgs=-4V 0 0 1 2 3 4 5 2.5 3 3.5 4 4.5 5 5.5 6 6.5 -Vds (Volts) Fig 1: On-Region Characteristics -Vgs(Volts) Figure 2: Transfer Characteristics 1.60 Id=-8A Vgs=-6V 25°C 5 0 60 50 Normalized On-Resistance 55 Vgs=-10V Vgs=-20V Rds(on) (m: ) 45 40 35 30 25 20 15 10 0 5 10 15 20 25 -Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 100 90 80 Id=-8A Vgs=-20V Vgs=-10V 1.40 1.20 1.00 0.80 0 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 1.0E+01 1.0E+00 1.0E-01 125°C Rds(on) (m: ) -Is (A) 70 1.0E-02 60 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL 1.0E-03 COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARIS 50 1.0E-04 OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, 40 FUNCTIONS AND RELIABILITY WITHOUT NOTICE. 25°C 125°C 1.0E-05 30 25°C 1.0E-06 20 0.0 0.2 0.4 0.6 0.8 1.0 4 8 12 16 20 -Vsd (Volts) -Vgs (Volts) Figure 6: Body-Diode Characteristics Figure 5: On-Resistance vs. Gate-Source Voltage 10 Vds=-15V Id=-8A 8 1500 1250 Ciss Capacitance (pF) -Vgs (Volts) 1000 750 500 Coss 250 Crss 0 6 4 2 0 0 4 8 12 16 20 -Qg (nC) Figure 7: Gate-Charge Characteristics 0 5 10 15 20 25 30 -Vds (Volts) Figure 8: Capacitance Characteristics 100.0 Tj(max)=150°C, Ta=25°C Rds(on) limited 0.1s 1.0 10Ps 100Ps 1ms 10ms 1s 10s DC 0.1 0.1 1 -Vds (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 10 100 40 Tj(max)=150°C Ta=25°C 30 -Id (Amps) Power (W) 10.0 20 10 0 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 10 ZTja Normalized Transient Thermal Resistance D=Ton/T Tj,pk=Ta+Pdm.ZTja.RTja RTja=40°C/W 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL Pd 0.1 COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISI OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, Ton FUNCTIONS AND RELIABILITY WITHOUT NOTICE. T Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance