ELM14427AA-N

30 -10V -6V -5V 25 Vds=-5V 20 20 -Id (A) -Id (A) -4.5V 15 125°C 10 10 Vgs=-4V 5 25°C 0 0 2 3 4 -Vds (Volts) Fig 1: On-Region Characteristics 1 5 0 1 1.5 2 2.5 3 3.5 4 4.5 -Vgs(Volts) Figure 2: Transfer Characteristics 5 12 1.6 Normalized On-Resistance 11 Rds(on) (m: ) Vgs=-10V 1.4 Vgs=-10V Id=-10A VGS=-10V, VDS=-15V, 10 ID=-12.5A Vgs=-20V Id=-12.5A 1 1.2 9 Vgs=-20V 8 0 5 10 15 20 25 -Id (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 50 Id=-12.5A 0.8 0 25 50 75 100 125 150 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 1.0E+01 1.0E+00 40 Rds(on) (m: ) 1.0E-01 125°C 30 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL 1.0E-02 COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARIS 125°C OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, 1.0E-03 20 FUNCTIONS AND RELIABILITY WITHOUT NOTICE. 1.0E-04 10 25°C 1.0E-05 0 4 5 6 7 8 9 10 -Vgs (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage 1.0E-06 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -Vsd (Volts) Figure 6: Body-Diode Characteristics 25°C -Is (A) 10 Vds=-15V Id=-12.5A 8 3000 2500 Ciss Capacitance (pF) -Vgs (Volts) 2000 1500 Coss 1000 500 0 Crss 6 4 2 0 0 5 20 25 30 35 40 -Qg (nC) Figure 7: Gate-Charge Characteristics 10 15 45 0 15 20 25 -Vds (Volts) Figure 8: Capacitance Characteristics 5 10 30 100.0 Rds(on) limited 100Ps 1ms 10Ps 40 Tj(max)=150°C Ta=25°C 30 -Id (Amps) VGS=-10V, VDS=-15V, 10ms 0.1s Power (W) 10.0 ID=-12.5A 20 1.0 1s Tj(max)=150°C Ta=25°C 10s DC 1 10 100 10 0.1 0.1 -Vds (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 0 0.001 0.1 1 10 100 1000 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) 0.01 10 1 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARIS OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, Pd FUNCTIONS AND RELIABILITY WITHOUT NOTICE. 0.1 Ton T Single Pulse 0.01 0.00001 0.0001 0.1 1 10 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance 0.001 0.01 100 1000 ZTja Normalized Transient Thermal Resistance D=Ton/T Tj,pk=Ta+Pdm.ZTja.RTja RTja=40°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse