MPZ2012S331A

(1/2) Chip Beads(SMD) For Power Line MPZ Series MPZ2012 Type FEATURES • The MPZ series are multilayer chip impeders for power supply line applications. • High miniaturized, these parts nonetheless exhibit low DC resistance and high current handling capability. • The products contain no lead and also support lead-free soldering. • It is a product conforming to RoHS directive. APPLICATIONS Noise elimination of DC power supply lines for USB interface circuitry, personal computers, electronic games, hard disk drives, and other general electronic equipment. Also effective as a noise countermeasure in signal lines. PRODUCT IDENTIFICATION MPZ 2012 S 331 A T (1) (2) (3) (4) (5) (6) (1)Series name (2)Dimensions L× W (3)Material code (4)Nominal impedance 331: 330Ω at 100MHz (5)Characteristic type (6)Packaging style T: Taping RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING Conformity to RoHS Directive SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 2+0.3, –0.1 1.25 ± 0.2 0.5 ± 0.3 0.85 ± 0.2 1.3 1 1.3 1.2 Weight: 8mg Dimensions in mm TEMPERATURE RANGES Operating/storage –55 to +125°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces/reel 10s max. 250 to 260˚C 230˚C Natural cooling HANDLING AND PRECAUTIONS • Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. • After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. • The inductance value may change due to magnetic saturation if the current exceeds the rated maximum. • Do not expose the inductors to stray magnetic fields. • Avoid static electricity discharge during handling. • When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350°C. Soldering time should not exceed 3 seconds. 180˚C 150˚C Preheating 60 to 120s Time(s) Soldering 30 to 60s • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) • All specifications are subject to change without notice. 004-03 / 20061022 / e9413_mpz.fm (2/2) ELECTRICAL CHARACTERISTICS Part No. MPZ2012S300A MPZ2012S101A MPZ2012S221A MPZ2012S331A MPZ2012S601A ∗ 1 Test Rated current(A) Impedance (Ω)[100MHz]∗ 1 30±10Ω 100±25% 220±25% 330±25% 600±25% DC resistance (Ω)max. 0.01 0.02 0.04 0.05 0.1 Rated current∗ 2 (A)max. 5 4 3 2.5 2 RATED CURRENT vs. TEMEPERATURE CHARACTERISTICS (DERATING) 6 5 4 3 2 1 0 –55 –35 –15 5 25 45 65 Temperature(˚C) 85 105 125 S300A S101A S221A S331A S601A equipment: E4991A or equivalent Test tool: 16192A or equivalent ∗ 2 Please refer to the graph of RATED CURRENT vs. TEMPERATURE CHARACTERISTICS(DERATING) about the rating current at 85°C or more in temperature of the product. TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MPZ2012S300A MPZ2012S101A 50 40 Impedance(Ω) Impedance(Ω) MPZ2012S221A 300 250 Impedance(Ω) 160 140 120 100 80 60 40 20 X Z R 30 20 10 0 200 Z Z R X 150 100 R X 50 1 10 100 1000 Frequency (MHz) 10000 0 1 10 100 1000 Frequency (MHz) 10000 1 10 100 1000 Frequency (MHz) 10000 0 MPZ2012S331A 400 350 Impedance(Ω) MPZ2012S601A 800 700 Impedance(Ω) 300 250 200 150 100 50 0 1 10 100 1000 Frequency (MHz) 10000 X Z R 600 500 400 300 200 100 0 1 10 100 1000 Frequency (MHz) 10000 X Z R PACKAGING STYLES REEL DIMENSIONS TAPE DIMENSIONS 1.5 +0.1 –0.0 1.75±0.1 300min. Dimensions in mm 2.3±0.2 3.5±0.05 8.0±0.3 1.1max. 1.5± 0.2 4.0± 0.1 2.0± 0.05 4.0± 0.1 160min. Taping 200min. Sprocket hole Cavity 1.0 2.0± 0.5 ø13± 0.5 ø21± 0.8 ø178± 2.0 9.0± 0.3 13.0± 1.4 ø60± 2.0 Dimensions in mm Drawing direction • All specifications are subject to change without notice. 004-03 / 20061022 / e9413_mpz.fm