2522B-SF-DC-SA

2522 Microwave Packaged Photodiode MICROWAVE The 2522 packaged photodiode incorporates a high-speed planar PIN photodiode to provide a highly reliable, high-power photodiode component. This package is well suited for receiver applications with optical preamplification. The diode is well matched over the microwave frequency band, thereby simplifying high-speed integration. Performance Highlights Parameter Operating Temperature Bandwidth Responsivity, 1310 / 1550 nm Min -40 0.05 0.7 8 1280 15 -40 Typical 25 12 40 5 Max +85 22 5 12 1580 -40 12 +85 Units °C GHz A/W nA mA dB ps, p-p nm V dB V °C Features Highly reliable planar photodiode technology High power capability High breakdown voltage Bandwidth up to 22 GHz Good RF matching, 12 dB typ. Hermetically sealed Dark Current (25 C) Max Current RF Return Loss Group Delay Optical Wavelength Range Breakdown Voltage (IR = 10 μA) Optical Return Loss Photodiode Bias Voltage Storage Temperature Pinout Model Number Symbol VPD GND Function Photodiode Bias Case Ground 1 2 Applications Antenna Remoting Military Communications Phased Arrays Schematic AC Coupled DC Coupled 2 1 EW Delay Lines 2 1 RF Out 50 ohm RF Out 50 ohm For DC coupled version, do not connect RF output to a DC voltage greater than the photodiode’s bias voltage. Copyright © 2009 Emcore Corporation 626 293 3400 626 293 3428 satcom-sales@emcore.com www.emcore.com 2522 Microwave Packaged Photodiode MICROWAVE Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Storage Case Temperature Range Forward Current Reverse Bias Voltage Lead Soldering Temperature/Time Relative Humidity (non-condensing) Symbol TSTG IF VR RH Min -40 Max 85 5 15 250/5 85 Units ˚C mA V ˚C/sec % Electrical/Optical Characteristics Parameter Operating Temperature Bias Voltage Capacitance Responsivity Dark Current Optical Return Loss Wavelength Symbol TOP VR C R IDARK ORL λ Condition Referenced to base of package 1310 / 1550 nm 25°C 85°C Min -40 0.7 1280 Typical 25 5 Max 85 12 0.15 5 50 -40 1580 Units ˚C V pF A/W nA dB nm RF Characteristics Parameter Bandwidth AC Coupled Symbol f 2522A 2522B 2522C 2522A 2522B 2522C Z S21 Resistively matched SMA connector 50 MHz – 10 GHz 50 MHz – 20 GHz (B & C only) 50 MHz – 22 GHz (C only) 10 MHz – 10 GHz 10 MHz – 20 GHz (B & C only) 10 MHz – 22 GHz (C only) RL GD 0.05 0.05 0.05 0.01 0.01 0.01 8 50 2 3 4 2 3 4 12 < 40 10 20 22 GHz DC Coupled 10 20 22 4 5 6 dB p-p Flatness - DC Coupled 4 5 6 dB ps, p-p Ohm Condition Min Typical Max Units Impedance Flatness - AC Coupled Return Loss Group Delay Flatness 2 1. Specified characteristics apply for the recommended operating conditions at beginning of life, 25°C, unless noted otherwise. 2. 5% smoothing. Copyright © 2009 Emcore Corporation 626 293 3400 626 293 3428 satcom-sales@emcore.com www.emcore.com 2522 Microwave Packaged Photodiode MICROWAVE Ordering Information – Model Number Options Model Number 2522A-SF-AC-SA 2522B-SF-AC-SA 2522C-SF-AC-SA 2522A-SF-DC-SA 2522B-SF-DC-SA 2522C-SF-DC-SA Description Photodiode 10 GHz, SMA, AC Coupled, SC/APC Photodiode 20 GHz, SMA, AC Coupled, SC/APC Photodiode 22 GHz, SMA, AC Coupled, SC/APC Photodiode 10 GHz, SMA, DC Coupled, SC/APC Photodiode 20 GHz, SMA, DC Coupled, SC/APC Photodiode 22 GHz, SMA, DC Coupled, SC/APC Typical S21 / S22 Data Outline Drawing Rev: September 18, 2009 Copyright © 2009 Emcore Corporation 626 293 3400 626 293 3428 satcom-sales@emcore.com www.emcore.com