6000-0S3-3120

PRELIMINARY DATA SHEET | JULY 7, 2008 Applications Fiber Optical Protection Switching Redundant ring architectures FTTx networks EOS-6000 Optical A/B Switch Features Automatic, manual and remote switching Auto-switching time less than 25ms SNMP Control Interface Front Panel LED indicators 1 RU rack-mount enclosure with choice of AC or DC power supply The Model EOS-6000 Optical A/B Switch series product line is a high performance solution for network protection and optical redundancy. Packaged in a convenient 1RU housing, this line of optical switches provides an automatic or manual fiber switching function to protect the network from inadvertent service outages due to up-stream optical signal degradation. Each fiber’s optical signal power level is continuously monitored, as is an adjustable optical trip threshold for each channel. If the primary fiber’s optical signal power level falls below the desired optical trip threshold, the unit automatically switches to the secondary fiber, thus eliminating the need for intervention of a system operator. The EOS-6000 is capable of manual switching or can be switched remotely via SNMP adding optical protection to many system applications. The EOS-6000 series is designed as a low power, cost effective, high performance switching solution for applications that demand reliable and rapid response to changing network conditions. Figure 1: Redundant Path Configuration for CATV Broadcast 1 of 3 For more information on this and other products: Contact Sales at EMCORE 626-293-3400, or visit www.emcore.com. EOS-6000 Optical A/B Switch PRELIMINARY DATA SHEET | JULY 7, 2008 Optical Characteristics PROPERTY Operating Wave Length Insertion Loss Return Loss Polarization Dependent Loss Repeatability Isolation Input Optical Power Switching Time UNITS nm dB dB dB dB dB dBm ms MIN. TYP. 1310 +/- 10 or 1550+/-20 1.0 60 0.06 +/-0.01 -60 1.3 0.1 +/-0.02 -50 24 25 MAX. 55 General and Mechanical Specifications PROPERTY Switching Threshold Switching Mode Optical Connector Monitoring Interfaces Operating Temperature Storage Temperature Agency Listings Power Consumption Supply Range Dimensions (VAC) (VDC) REQUIREMENT 20 dB range – see ordering info Auto, Manual, remote SC/APC 100 Base-T Ethernet Rear Panel RS-232 interface LED Indicators 0°C to 50°C -25°C to 65°C FCC: Subpart B. Part 15, class “A” Unintentional Radiators 5W 85 to 240 VAC, 50/60 Hz 36 - 60 VDC 430x300x44mm Maximum COMMENTS Settable within range Other styles available SNMP V1 Reserved for Factory Use Power, Main, Backup, and Output Indicators 2 of 3 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com EMCORE Broadband Copyright 2008. EMCORE Corporation EOS-6000 Optical A/B Switch PRELIMINARY DATA SHEET | JULY 7, 2008 Model Number Information (note 1) Operating Wavelenghth 3 – 1310nm 5 – 1550nm Optics 1– SC/APC 2– FC/APC 3– SC/UPC 4– FC/UPC Power Supply 1 – AC 2 – DC Switching Threshold range 1 – [-30, -10] dBm 2 – [-20, 0] dBm 3 – [-10, 10] dBm 4 – [0, 20] dBm Emcore Logo 0 – No 2 – Yes Note 1: Not all configurations are available - contact factory. Example: 6000-0S5-1232 1550nm, SC/APC connectors, DC power supply, -10 to + 10 dBm input range, Emcore Logo. Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. 3 of 3 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com EMCORE Broadband Copyright 2008. EMCORE Corporation